News and Announcements (Softaculous)

News and Announcements (Softaculous) http://www.softaculous.com/board/index.php?fid=1 <![CDATA[Virtualizor 2.3.0 Launched]]> http://www.softaculous.com/board/index.php?tid=4212&tpg=1#p14442
The Virtualizor Team has released Virtualizor 2.3.0
This version contains a Security fix, a new feature and minor Bug fixes.

Below is a list of changes:

1) [Critical Bug Fix] - Added prevention for CSRF attacks. We would like to thank Rack911.com for discovering and reporting this issue.

2) In KVM servers, added a configuration to specify the Overcommit Memory Limit.

3) [Bug-Fix] - IPv6 support fixed for OpenVZ and KVM.

4) [Bug-Fix] - IPv6 support fixed for Debian templates in XEN.

5) [Bug-Fix] - In edit IPv6 page, users were able to change the Routed Network settings, which is prohibited and fixed now.

6) [Bug-Fix] - Admin could add IPv6 IPs without assigning the IP Pool. This is fixed now.

7) [Bug-Fix] - Disabled editing the routed network setting while NAT is enabled for the IP Pool.

8) [Bug-Fix] - Admin was able to add the server as a Slave to the same server. This is fixed now.

9) [GUI-Fix] - VNC details were displayed incorrectly in cluster while creating VPS. This is fixed now.

10) [Bug-Fix] - Admin could set the RAM value more than the available memory while editing the VPS. This is fixed now.

11) [Bug-Fix] - The Admin was able to set the SWAP RAM in XEN-PV and Burst RAM in OpenVZ to zero, while creating or editing a VPS. This is fixed now.

12) [Bug-Fix] - There was a Rescue mode configuration issue which caused a XEN-PV VPS to fail while starting the VPS. This is Fixed now.

Virtualizor supports OpenVZ, Xen and Linux-KVM and they all can be managed from the Master. We are adding more features and if you have any suggestions, do let us know. We hope you enjoy this version of Virtualizor.

Regards,
The Virtualizor Team]]> Thu, 13 Jun 2013 14:19:16 GMT http://www.softaculous.com/board/index.php?tid=4212&tpg=1#p14442 <![CDATA[Softaculous 4.2.5 released]]> http://www.softaculous.com/board/index.php?tid=4209&tpg=1#p14436
The Softaculous Team has released Softaculous 4.2.5
This version of Softaculous adds some cool new features and fixes some bugs.

A complete list of changes:

1) Improved the API to support the installation of Plugins, themes, etc of a script via Softaculous. Admin can also control these settings to enable, change default values, etc shown on the install form to end-users. Here is the guide.

2) Check HTTPS connection : If user selects to install a script on the https protocol, Softaculous will display a warning to the user if a Trusted SSL certificate is not found on the domain.

3) Import/Export settings : You can import/export the Softaculous admin settings from a server and replicate the settings. Here is the guide.
Note : This is available only for cPanel at the moment.

4) Detect real version : Admin can now determine the real version of installation(s) and update Softaculous records from Softaculous Admin panel -> Installations (The records are outdated in case the user updates the installation manually). Here is the guide.

5) Softaculous ACL plans will now be sorted alphabetically by default.

6) Bug Fix : Made changes to get correct number of existing databases in cPanel for compatibility with WHM 11.38+

7) Bug Fix : Added validation for Table prefix to allow only alphanumeric characters and _

8) Bug Fix : The Group order for Softaculous Apps category in cPanel was not saved 1st time when set from Softaculous Admin panel -> Select Top Scripts. This is now fixed.

9) Bug Fix : Language files were missing for Sign In page in a few languages for Softaculous Remote and Softaculous Enterprise. This has been fixed.

10) Bug Fix : Backup download option did not work on ISP Systems. It is fixed now.

We hope you enjoy the features, we will be adding many more features in the next version.

Regards,
The Softaculous Team]]> Tue, 11 Jun 2013 13:59:47 GMT http://www.softaculous.com/board/index.php?tid=4209&tpg=1#p14436 <![CDATA[ModulesGarden cPanel Extended for WHMCS with Softaculous]]> http://www.softaculous.com/board/index.php?tid=3631&tpg=1#p14407
Thank you for the interest.
Yes the promotion is still valid.

]]> Fri, 07 Jun 2013 07:25:02 GMT http://www.softaculous.com/board/index.php?tid=3631&tpg=1#p14407 <![CDATA[Webuzo 2.0.3 Launch]]> http://www.softaculous.com/board/index.php?tid=3637&tpg=1#p14406

Quote From : enigma June 6, 2013, 4:14 pm

Quote From : divij October 29, 2012, 6:11 am

Hi,

Sir the Bandwidth usage shows 100% because you are using unlimited bandwidth on your vps/server so there is no limit for the bandwidth.

This is quite confusing and got me scared before reading this.

Can't you just write "unlimited" across or something like that?

We will take it into account and have it re-framed.
]]> Fri, 07 Jun 2013 07:13:44 GMT http://www.softaculous.com/board/index.php?tid=3637&tpg=1#p14406 <![CDATA[Webuzo 2.0.3 Launch]]> http://www.softaculous.com/board/index.php?tid=3637&tpg=1#p14402

Quote From : divij October 29, 2012, 6:11 am

Hi,

Sir the Bandwidth usage shows 100% because you are using unlimited bandwidth on your vps/server so there is no limit for the bandwidth.

This is quite confusing and got me scared before reading this.

Can't you just write "unlimited" across or something like that?
]]> Thu, 06 Jun 2013 16:14:22 GMT http://www.softaculous.com/board/index.php?tid=3637&tpg=1#p14402 <![CDATA[ModulesGarden cPanel Extended for WHMCS with Softaculous]]> http://www.softaculous.com/board/index.php?tid=3631&tpg=1#p14401

Quote From : modulesgarden April 23, 2013, 2:14 pm

Simply use this promotional code when placing an order: MG_Softaculous
This promotion combines with other promotions!

For more information about cPanel Extended For WHMCS visit our website or Wiki.

Is this promotion still valid?
]]> Thu, 06 Jun 2013 15:53:49 GMT http://www.softaculous.com/board/index.php?tid=3631&tpg=1#p14401 <![CDATA[Webuzo 2.1.0 Launch]]> http://www.softaculous.com/board/index.php?tid=4139&tpg=1#p14224

Quote From : frewty May 21, 2013, 8:47 am

Hi,

Is there any updates on when we can upgrade from out existing version?

Thanks,
Anthony

Sir the upgrade utility is in the testing phase. It will be available soon.
]]> Tue, 21 May 2013 09:31:57 GMT http://www.softaculous.com/board/index.php?tid=4139&tpg=1#p14224 <![CDATA[Webuzo 2.1.0 Launch]]> http://www.softaculous.com/board/index.php?tid=4139&tpg=1#p14223
Is there any updates on when we can upgrade from out existing version?

Thanks,
Anthony]]> Tue, 21 May 2013 08:47:16 GMT http://www.softaculous.com/board/index.php?tid=4139&tpg=1#p14223 <![CDATA[Webuzo 2.1.0 Launch]]> http://www.softaculous.com/board/index.php?tid=4139&tpg=1#p14178

Quote

Hi,

I made a clean installation of Webuzo 2.1.0, then installed nginx
from the Apps section and activated it from the System Utilities. The
only setting I've changed was to tick the Is VPS box as this is the
case.

Then I tried a few installations and every time I try to access them
I get a "403 Forbidden" error and an indication of the nginx version.

If I switch back to Apache it works immediately and there are no .htaccess for those installations.

Tried with a Wordpress, and a Joomla and the behaviour is the same.

Am I doing something wrong?

Sir could you please open a support ticket and submit the root details of your server and access to your Enduser Panel, we will resolve your issues
Support : https://www.softaculous.com/support/
]]> Fri, 17 May 2013 12:33:34 GMT http://www.softaculous.com/board/index.php?tid=4139&tpg=1#p14178 <![CDATA[Webuzo 2.1.0 Launch]]> http://www.softaculous.com/board/index.php?tid=4139&tpg=1#p14177

Quote From : valley May 17, 2013, 10:12 am

Hi,

Sir the scripts which does not require any changes to be made to Apache's configuration or .htaccess files will work smooth on NGINX.

However, we are working on a solution to replace the .htaccess files in case of NGINX to completely automate the process.

Hi,

I made a clean installation of Webuzo 2.1.0, then installed nginx from the Apps section and activated it from the System Utilities. The only setting I've changed was to tick the Is VPS box as this is the case.
Then I tried a few installations and every time I try to access them I get a "403 Forbidden" error and an indication of the nginx version.
If I switch back to Apache it works immediately and there are no .htaccess for those installations.
Tried with a Wordpress, and a Joomla and the behaviour is the same.

Am I doing something wrong?
]]> Fri, 17 May 2013 12:22:15 GMT http://www.softaculous.com/board/index.php?tid=4139&tpg=1#p14177