News and Announcements (Softaculous) http://www.softaculous.com/board/index.php?fid=1 <![CDATA[Virtualizor 2.5.3 Launched !]]> http://www.softaculous.com/board/index.php?tid=5793&tpg=1#p21108
The Virtualizor Team has released Virtualizor 2.5.3
This version has new features and some bug fixes.

1) [Feature] IPv6 Subnets have been added. You can assign IPv6 subnets to the VMs. For a detailed guide please refer to http://www.virtualizor.com/wiki/IPv6_Subnets

2) [Feature] Added the feature to create VMs in queues. You can set the number of Active creation processes from the Virtualizor Admin Panel -> Configuration -> General Settings -> Enable Queue Creation. The utility to view the active tasks and also the raw logs will be improved in future releases.

3) [Feature] Added the feature to set the Outgoing bandwidth speed / Upload Bandwidth speed for a VM. By default the VPS Network speed will be used to set the outgoing bandwidth limit if a seperate Outgoing bandwidth has not been set. The Upload Bandwidth speed setting is available in the "Advanced Settings" which creating / editing a VM.

4) [Feature] A new resource i.e. Total Num Cores for the Cloud/Reseller User has been added. Now if the admin sets the Total Cores for a user, the user cannot create VMs which will have the total number of cores exceeding the value set by the admin.

5) [Feature] Added the capability to sort the VPS list in the Virtualizor Admin Panel.

6) [Feature] Added the feature to set a cron job to backup the Master Servers Database and send it via Email.

7) [Feature] The Cloud User had to choose the Region and Virtualization when there was only one region with one virtualization available. We have improved this and the utility will now choose the available region and virtualization by default IF there is only one region and virtualization set for the user.

8) [Task] The Edit User utility UI has been improved.

9) [Task] We have updated the WHMCS Module and added the capability to upgrade the VM to a new Plan. In WHMCS you simply need to assign the VPS the new plan and click on "Change Package".

10) [Task] No error was shown when the Admin searched for a non-existent user in the VPS List page's search utility. This behaviour is now changed and an error will be reported.

11) [Task] Virtualizor uses the oflag=direct and iflag=direct when using "dd" during backups to perform various tasks. We have added an option to disable this if the Admin so desires to do so. The Admin will have to manually set the variable in the config file. Please refer to the wiki : http://www.virtualizor.com/wiki/Disable_DD_Flags

12) [Task] In List VPS utility, the admin will now be able to see that the VPS is owned by a Cloud User and also whether the VPS is owned by a sub-user of the Cloud User.

13) [Bug Fix] The noVNC utility blocked the right top side of the viewing area. This has been fixed.

14) [Bug Fix] SSH Port was set to blank when backup settings were called and the SSH port was not set or empty. This is fixd.

15) [Bug Fix] When a user performed an OpenVZ Backup, the email sent to the user contained "Virtualizor" as the sender. This is now fixed and set to use the SiteName variable.

16) [Bug Fix] IP Stealing fixed for Xen.

17) [Bug Fix] A VM with Mac based IPs was not given a new Mac address when the IP was edited. This is now fixed.

Virtualizor supports OpenVZ, Xen, XenServer and Linux-KVM on CentOS and Ubuntu and they all can be managed from the Master. We are adding more features and if you have any suggestions, do let us know. We hope you enjoy this version of Virtualizor.

Regards,
The Virtualizor Team]]>
Mon, 01 Sep 2014 12:27:50 GMT http://www.softaculous.com/board/index.php?tid=5793&tpg=1#p21108
<![CDATA[Webuzo 2.2.8 Launched]]> http://www.softaculous.com/board/index.php?tid=5778&tpg=1#p21053 Hi,

The Webuzo Team has released Webuzo 2.2.8. This version has some quick new features and minor bug fixes.

1) Upgrade System Applications : Users can now upgrade their System Applications like Apache, Nginx, MySQL, PHP, etc by a click of a button from the Webuzo Enduser Panel.
Board Image


2) Users can now add SPF records for the respective domains from the Advanced DNS Menu.

3) [BUG FIX] Users could add directory as well instead of file to the extra configuration menu.

This is fixed now.
Hope you enjoy this version of Webuzo
]]>
Mon, 25 Aug 2014 11:31:30 GMT http://www.softaculous.com/board/index.php?tid=5778&tpg=1#p21053
<![CDATA[Virtualizor 2.5.2 Launched]]> http://www.softaculous.com/board/index.php?tid=5737&tpg=1#p20923
The Virtualizor Team has released Virtualizor 2.5.2
This version has many bug fixes and some critical bug fixes.

1) [Critical Bug Fix] We would like to thank Rack911 for reporting the issues. These are critical bug fixes and we recommend all users to upgrade immediately. Virtualizor has auto-upgrade enabled by default so your installation of Virtualizor will auto-upgrade in 24 hours if you have not disabled auto-upgrades. 

2) [Feature] This release contains support for CentOS 7 as base node for KVM Virtualization. Other hypervisors will also be supported soon in CentOS 7.

3) [Bug-Fix] Fixed number of cores calculation bug in Xen on CentOS 5 based nodes for CPU Pinning.

4) [Bug-Fix] Minor javascript bug fix in the Admin Panel for Java VNC launcher.

Virtualizor supports OpenVZ, Xen, XenServer and Linux-KVM on CentOS
and Ubuntu and they all can be managed from the Master. We are adding
more features and if you have any suggestions, do let us know. We hope
you enjoy this version of Virtualizor.

Regards,
The Virtualizor Team    ]]>
Sat, 16 Aug 2014 16:25:51 GMT http://www.softaculous.com/board/index.php?tid=5737&tpg=1#p20923
<![CDATA[Virtualizor 2.5.1 Released !]]> http://www.softaculous.com/board/index.php?tid=5731&tpg=1#p20910
The Virtualizor Team has released Virtualizor 2.5.1
This version has many new features and also many bug fixes.

1) [Feature] noVNC, an HTML5 VNC Viewer added for Xen and KVM Virtualizor. Users can also use the Default JAVA VNC Viewer. Only the master server needs to have the noVNC settings enabled and it will be applied on all slaves. The guide to enable noVNC can be found here : http://www.virtualizor.com/wiki/noVNC

2) [Feature] JAVA VNC Viewer updated and signed by Softaculous Ltd. This will allow the enduser to use the VNC Viewer even with the regular security settings of Java.

3) [Feature] JAVA SSH Console updated and signed by Softaculous Ltd. This will allow the enduser to use the SSH Console even with the regular security settings of Java.

4) [Feature] The Migration Wizard will allow to preserve IPs of VPS if the IPs are in same IP Pool.

5) [Feature] WHMCS Module to create Reseller/Cloud Accounts has been launched : http://www.virtualizor.com/wiki/WHMCS_Module_Reseller_Accounts

6) [Feature] WHMCS Module to create VMs by Cloud Accounts has been launched : http://www.virtualizor.com/wiki/WHMCS_Module_Resellers

7) [Feature] Email notifications will be sent to the Admin if any slave server is Offline. The emails will be sent every 6 hours.

8) [Feature] "Search by User" option has been added in search form of List VPS in the admin panel.

9) [Feature] Windows VPS will now be resized when the VPS is Edited. However the VPS needs to have a clean shutdown from inside the VPS and then started.

10) [Task] If no Media Groups were assigned to a Reseller / Cloud Account, no templates were available to the reseller. We have now modified this behaviour to show all templates as per the virtualization selected, if no Media Group is assigned to the reseller.

11) [Bug-Fix] ISOs were not shown in Reseller panel while creating an instance. This is fixed now.

12) [Bug-Fix] In OpenVZ, nameservers assigned via the Edit Wizard were not being set inside the VPS. This is fixed now.

13) [Bug-Fix] Maintenance mode showed logout link even if the user is not logged in. This is fixed now.

14) [Bug-Fix] A better explanatory note has been added for the "VPS Loads" page in the Admin Panel. The "VPS Loads" utility is only for OpenVZ and no other virtualization at this point in time.

15) [Bug-Fix] VirtIO option was enabled in API mode for XEN and OpenVZ. This is fixed now.

16) [Bug-Fix] The Windows Template creator tool had a small bug. This is fixed now.

17) [Bug-Fix] Enduser panel operations have been restricted if the VPS is suspended.

18) [Bug-Fix] If the VPS on a slave server was edited and a new ISO was added to the VPS, the ISO was not downloaded from the master if the ISO was missing on the slave. This is fixed now.

19) [Bug-Fix] Tun Tap and PPP fixed in OpenVZ

20) [Bug-Fix] OpenVZ : Total Ram was shown higher (in the Virtualizor Panel) than the assigned Ram in VSwap enabled nodes. This is fixed now.

21) [Bug-Fix] OpenVZ : User Initiated backups will not use /tmp

22) [Bug-Fix] OpenVZ : User Initiated backups / restore fixed in PLOOP mode.

23) [Bug-Fix] Reseller Bandwidth Resource calculation while creating the VPS was wrong. This is fixed now.

24) [Bug-Fix] Reseller Max Core check was not working. This is fixed now.

25) [Bug-Fix] OpenSUSE templates were not being downloaded correctly. This is fixed now.

Virtualizor supports OpenVZ, Xen, XenServer and Linux-KVM on CentOS and Ubuntu and they all can be managed from the Master. We are adding more features and if you have any suggestions, do let us know. We hope you enjoy this version of Virtualizor.

Regards,
The Virtualizor Team]]>
Thu, 14 Aug 2014 07:44:22 GMT http://www.softaculous.com/board/index.php?tid=5731&tpg=1#p20910
<![CDATA[Webuzo 2.2.7 Launched]]> http://www.softaculous.com/board/index.php?tid=5719&tpg=1#p20857 Hi,

The Webuzo Team has released Webuzo 2.2.7. This version has some quick new features and minor bug fixes.

1) Added New Application : Trac is an enhanced wiki and issue tracking system for software development projects. Trac uses a minimalistic approach to web-based software project management. Our mission is to help developers write great software while staying out of the way. Trac should impose as little as possible on a team’s established development process and policies.

2) Include Extra Configuration : Users can now include their additional Webserver (Apache/NGINX/Lighttpd) configuration files to a specific domain.
Board Image


Here is the Guide for same.


3) Updated MaxRequestsPerChild for Apache Configuration : Maximum number of requests a server process serves

4) Pre-install system applications with the Webuzo installer, while configuring them during the initial setup.
Command
./install.sh --donotconfigure=1

5) Added option for users to install WordPress themes from the WordPress install form itself from the Webuzo Enduser Panel.
Board Image


6) Users can now select to auto update WordPress plugins or themes from Enduser Panel. This can be selected on the Install form or on Edit Installation page.

7) Improved the Import utility to import installations from other auto installers. Here is theguide.

8) Added CLI utility to rebuild caches in Webuzo. Click here for guide.


9) Improved the Scripts packaging API.


10) [BUG FIX] Unwanted spaces added while creating domains from Webuzo Enduser Panel caused inappropriate building of Apache configurations. This is fixed now.


11) [BUG FIX] Changing the PHP configurations from the Webuzo Enduser Panel attempted to restart the Apache server, even if it was not set as the default webserver.


12) [BUG FIX] When all the scripts in a Category were disabled the category was displayed as undefined. This is fixed now and the category will be hidden when there are no scripts enabled under that category.


13) [BUG FIX] Demo URL for custom scripts in the top scripts section has been fixed.
Hope you enjoy this version of Webuzo]]>
Tue, 12 Aug 2014 11:16:36 GMT http://www.softaculous.com/board/index.php?tid=5719&tpg=1#p20857
<![CDATA[Softaculous 4.5.4 released]]> http://www.softaculous.com/board/index.php?tid=5715&tpg=1#p20846
The Softaculous Team has released Softaculous 4.5.4

1) UI Improvement : Softaculous will be displayed in the control panel's native UI, if enabled by the admin. Added for DirectAdmin and Plesk.

2) Added CLI utility to rebuild caches in Softaculous. Click here for guide.

3) Improved the Scripts packaging API.

4) Bug Fix : Due to recent changes in database name prefix policy by cPanel, if the cPanel username was more than 8 characters the installation failed. This has been handled.

5) Bug Fix : In ISP System control panel the email detection has been improved to detect correct email from the control panel.

6) Bug Fix : In Softaculous Remote the domains list on Manage Domains page was not populated correctly. This is fixed now.

7) Bug Fix : Demo URL for custom scripts in the top scripts section has been fixed.

Regards,
The Softaculous Team]]>
Mon, 11 Aug 2014 14:28:24 GMT http://www.softaculous.com/board/index.php?tid=5715&tpg=1#p20846
<![CDATA[Softaculous now available for Free on XAMPP, EasyPHP and WAMP]]> http://www.softaculous.com/board/index.php?tid=5685&tpg=1#p20733
Which stack are you using ?

It looks like ioncube is not loaded in your PHP. Can you please try to enable Ioncube and try to access Softaculous again.]]>
Sun, 03 Aug 2014 11:09:12 GMT http://www.softaculous.com/board/index.php?tid=5685&tpg=1#p20733
<![CDATA[Softaculous now available for Free on XAMPP, EasyPHP and WAMP]]> http://www.softaculous.com/board/index.php?tid=5685&tpg=1#p20730
http://127.0.0.1/softaculous/enduser/index.php

There is a blank page. What is the problem?

Thanks]]>
Sat, 02 Aug 2014 20:14:51 GMT http://www.softaculous.com/board/index.php?tid=5685&tpg=1#p20730
<![CDATA[Softaculous now available for Free on XAMPP, EasyPHP and WAMP]]> http://www.softaculous.com/board/index.php?tid=5685&tpg=1#p20716
Installing Softaculous in XAMPP, EasyPHP or WAMP is very easy. Download the package from the below links :
PHP 5.2
PHP 5.3+

Extract the package under htdocs or www directory and then access the following URL :
http://localhost/softaculous/install.php

Complete the Installer and that's it you are ready to use Softaculous.

Guide to install Softaculous in XAMPP

The Softaculous apps library includes popular applications, including: WordPress, Drupal, Joomla, Concrete5, Moodle, ShopSite, phpBB, MyBB, SMF, bbPress, b2evolution, StatusNet, Coppermine, Gallery, Mediawiki, DokuWiki, TikiWiki, Elgg, Dolphin, OpenX, SquirrelMail, LimeSurvey, Piwik, Mantis, SugarCRM, WHMCS, PrestaShop, Magento, CraftySyntax, osTicket, Claroline, etc. most of which can be installed in several languages by just choosing the language on the Install form.

Softaculous also offers AMPPS - a WAMP, MAMP and LAMP stack with Softaculous installed. AMPPS is a complete package on your desktop, same like the server that provides many open source web applications. Application Management, Domain management, Database management, etc are provided in a secure environment to ease your development.
]]>
Thu, 31 Jul 2014 14:01:19 GMT http://www.softaculous.com/board/index.php?tid=5685&tpg=1#p20716
<![CDATA[Virtualizor templates for OpenVZ updated]]> http://www.softaculous.com/board/index.php?tid=5683&tpg=1#p20713
The Virtualizor team has Updated following templates for OpenVZ.

Updated Templates (For Both - x86/x86_64 ) :


  • CentOS 5
  • CentOS 6
  • Debian 6
  • scientific OS 6
  • Suse 12.2 (x86 Only)
  • Suse 12.3
  • Suse 13.1
  • Ubuntu 10.04
  • Ubuntu 12.04
  • Ubuntu 12.10
  • Ubuntu 14.04
  • Fedora 19
  • Fedora 20




Regards,
Virtualizor Team]]>
Thu, 31 Jul 2014 06:41:41 GMT http://www.softaculous.com/board/index.php?tid=5683&tpg=1#p20713