Softaculous http://www.softaculous.com/board/index.php? <![CDATA[i install ampps 2.9 after install apache service can't start.]]> http://www.softaculous.com/board/index.php?tid=7104&tpg=2#p24987
Maybe in the use of English by a non-English born person the instructions for fixing the path statement didn't quite come across how a native English speaker would expect and this might be why you have trouble with your laptop.

Example: E:\ampps\http.conf.  As I read his instructions, I had to replace the whole line of code. But in reality it was only the first part of the statement. E:\ampps that need to be replaced. Al the rest is still valid. '$path' tells anything in Ampps looking for the location of files to go to the default directory of ampps, where ever it is.

Hope this helps For what you get Ampps is an exceptional package. Now  if only they can figure out how to write to the hosts file of Windows!

Ryadia



Quote From : KnucklezRulez February 14, 2015, 7:30 pm
Right I have tried the changing of everything that is $path to where it exists on my laptop and that didn't work. So I am going to uninstall 2.9 and install 2.8. I hope that 2.8 will work and is there anything else I need to know about 2.8. Changes to any configure files or anything???
]]>
Mon, 02 Mar 2015 23:07:37 GMT http://www.softaculous.com/board/index.php?tid=7104&tpg=2#p24987
<![CDATA[Apache won't start]]> http://www.softaculous.com/board/index.php?tid=7235&tpg=1#p24986
Code
sudo killall httpd
After this, AMPPS worked.]]>
Mon, 02 Mar 2015 21:49:41 GMT http://www.softaculous.com/board/index.php?tid=7235&tpg=1#p24986
<![CDATA[PhpMyAdmin doesn't work with PHP 5.4, 5.5 or 5.6]]> http://www.softaculous.com/board/index.php?tid=7241&tpg=1#p24985 ]]> Mon, 02 Mar 2015 19:40:16 GMT http://www.softaculous.com/board/index.php?tid=7241&tpg=1#p24985 <![CDATA[PhpMyAdmin doesn't work with PHP 5.4, 5.5 or 5.6]]> http://www.softaculous.com/board/index.php?tid=7241&tpg=1#p24984
The error I get when I enable PHP 5.4, 5.5 or 5.6 when going to PhpMyAdmin is: "The mysqli|mysql extension is missing. Please check your PHP configuration. See our documentation for more information." The help link refers me to /phpmyadmin/doc/html/faq.html#faqmysql but this isn't helpful because the packages are enabled, it just cannot find libmysqlclient.18.dylib. When I go to /cgi-bin/phpinfo.cgi at the bottom of this "PHP Info" page I get:

Quote
Warning: PHP Startup: Unable to load dynamic library '/Applications/AMPPS/php-5.6/lib/extensions/ext/mysqli.so' - dlopen(/Applications/AMPPS/php-5.6/lib/extensions/ext/mysqli.so, 9): Library not loaded: libmysqlclient.18.dylib Referenced from: /Applications/AMPPS/php-5.6/lib/extensions/ext/mysqli.so Reason: image not found in Unknown on line 0

Warning: PHP Startup: Unable to load dynamic library '/Applications/AMPPS/php-5.6/lib/extensions/ext/pdo_mysql.so' - dlopen(/Applications/AMPPS/php-5.6/lib/extensions/ext/pdo_mysql.so, 9): Library not loaded: libmysqlclient.18.dylib Referenced from: /Applications/AMPPS/php-5.6/lib/extensions/ext/pdo_mysql.so Reason: image not found in Unknown on line 0

Warning: PHP Startup: Unable to load dynamic library '/Applications/AMPPS/php-5.6/lib/extensions/ext/mysql.so' - dlopen(/Applications/AMPPS/php-5.6/lib/extensions/ext/mysql.so, 9): Library not loaded: libmysqlclient.18.dylib Referenced from: /Applications/AMPPS/php-5.6/lib/extensions/ext/mysql.so Reason: image not found in Unknown on line 0

However, when I run these commands via the command line to see if mysql loads OK it does!

PHP Code

 ➜  AMPPS  pwd
/Applications/AMPPS
➜  AMPPS  php
-5.6/bin/php -'if (extension_loaded("mysqli")) { print_r("loaded"); }'
loaded


I suspect this is a problem with Apache and it's not running PHP with the right arguments or something or using a totally different PHP than the one in AMPPS.

How can I troubleshoot this further?
]]>
Mon, 02 Mar 2015 19:30:13 GMT http://www.softaculous.com/board/index.php?tid=7241&tpg=1#p24984
<![CDATA[i install ampps 2.9 after install apache service can't start.]]> http://www.softaculous.com/board/index.php?tid=7104&tpg=2#p24983 Mon, 02 Mar 2015 18:57:41 GMT http://www.softaculous.com/board/index.php?tid=7104&tpg=2#p24983 <![CDATA[Unable to create VPS's on 'File' storage]]> http://www.softaculous.com/board/index.php?tid=7240&tpg=1#p24982
I am trying out a new slave node using the 'File' storage type with QCOW2 as the format.

The storage shows up fine in the storage section: http://i.spartanhost.net/s-00-33-10.png but when I try to create a VPS on that server box, it gets stuck at 43% (building the VPS). If I close out then the VPS is created but of course unusable as no property files have been created for it etc.

Anyone any idea how to resolve this or if it's a bug within Virtualizor? I'd be surprised if it was as that means the whole 'File' storage system is unusable when it was meant to be a major feature.]]>
Mon, 02 Mar 2015 17:08:48 GMT http://www.softaculous.com/board/index.php?tid=7240&tpg=1#p24982
<![CDATA[Email for addon domains does not work]]> http://www.softaculous.com/board/index.php?tid=7227&tpg=1#p24981 www.anotherdomain.com also points to my server and pings ok.
mx.anotherdomain.com points to my server and pings ok.
*.anotherdomain.com. points to my server and pings ok.
I have 4 running servers and 8 domains using postfix with this DNS entry scheme, and they all work ok. 

So, its a mystery, but it should work.]]>
Mon, 02 Mar 2015 16:52:45 GMT http://www.softaculous.com/board/index.php?tid=7227&tpg=1#p24981
<![CDATA[Ghost is incompatible]]> http://www.softaculous.com/board/index.php?tid=5728&tpg=1#p24980

]]>
Mon, 02 Mar 2015 15:15:26 GMT http://www.softaculous.com/board/index.php?tid=5728&tpg=1#p24980
<![CDATA[License Problem]]> http://www.softaculous.com/board/index.php?tid=7239&tpg=1#p24979

Did not exceed the free version?

]]>
Mon, 02 Mar 2015 15:06:22 GMT http://www.softaculous.com/board/index.php?tid=7239&tpg=1#p24979
<![CDATA[Slave server offline even if it is turned on]]> http://www.softaculous.com/board/index.php?tid=7238&tpg=1#p24978
I am having a master and slave server. An unexpected power failure occurred and slave became off. After the power is up, I turned on the slave server. But, the master still shows, the slave is offline. I tried the following workarounds and nothing worked.

1. Restarted virtualualizor daemon on  master
2. Tried SSH ing from master to Slave and it worked, so there is no network issues.

Please help to sort out this.


]]>
Mon, 02 Mar 2015 13:54:34 GMT http://www.softaculous.com/board/index.php?tid=7238&tpg=1#p24978