News and Announcements (Softaculous) http://www.softaculous.com/board/index.php?fid=1 <![CDATA[Virtualizor 2.7.8 Launched]]> http://www.softaculous.com/board/index.php?tid=8051&tpg=1#p27739
The Virtualizor Team has released Virtualizor 2.7.8
This version has features and some bug fixes.
The following is a list of changes in this version :

[Task] The Edit VPS wizard will now show the Disk UUID for reference.

[Task] Multiple deletion option of VPS backups is now added in the Admin panel.

[Task] A Database Repair utility has been added. Please refer to the following guide :
http://virtualizor.com/wiki/Repair_Database

[Task] Improved the VPS Manage section in the Enduser panel for mobile view.

[Task] Added support for migrating Raw files based VMs to LVM using the migration wizard.

[Task] Added support to set VPS Backup settings through Admin SDK.

[Task] Added support to Restore and Delete VPS backups using Admin SDK.

[Task] API calls have been added for VPS Backups

[Bug-Fix] In the new Admin panel UI, the checkboxes were not visible in some mobiles. This is now fixed.

[Bug-Fix] When a Recipe was viewed, it was displayed on one line. This is now fixed.

[Bug-Fix] If a VPS backup was deleted and the backup was done over SSH, all VPS backups of that day was deleted. This is now fixed.

[Bug-Fix] While editing an OpenVZ VPS, if the available space was less than the VPS allocated space, an error would be thrown of insufficient space. This is now fixed.

[Bug-Fix] If a slave server was removed and re-added, IPs which clashed on the Slave would be freed up on the master and they would not display for the VPS to which they were assigned. This is now resolved.

[Bug-Fix] Installing Control Panel while VPS creation on a slave server was not working. This is now fixed.

[Bug-Fix] If the admin had added more than 20K IPv6 IPs, the Add VPS / Edit VPS wizard page was dying due to Memory exhaust error. This is fixed now.

[Bug-Fix] While backing up Thin LVM based VPS(s), the path was set wrong. This is now fixed.

[Bug-Fix] Email database backup for large DBs was not working due to memory limit. This is now fixed.

[Bug-Fix] In the new Admin Panel UI, Edit VPS wizard was broken for nodes running CentOS 7 and Ubuntu 14. This is fixed.

[Bug-Fix] Setting an email address for DB backup was not working and the emails were being sent to the Admin Email. This is now resolved.

[Bug-Fix] In enduser panel users were not able to stop or restart the services on OpenVZ VPS(s). This is now fixed.

[Bug-Fix] If a secondary disk of a VPS was more than 1TB and the VPS was edited, the data of the secondary disk was overwritten. This is now fixed.

[Bug-Fix] In IE 8, the enduser panel was giving a JavaScript error. This is fixed.

Virtualizor supports OpenVZ, Xen, XenServer and Linux-KVM on CentOS and Ubuntu and they all can be managed from the Master. We are adding more features and if you have any suggestions, do let us know. We hope you enjoy this version of Virtualizor.

Regards,
The Virtualizor Team]]>
Wed, 02 Sep 2015 11:53:29 GMT http://www.softaculous.com/board/index.php?tid=8051&tpg=1#p27739
<![CDATA[Ampps 3.3 Launched]]> http://www.softaculous.com/board/index.php?tid=7980&tpg=1#p27674
It seems that you are facing the issue as the mail is not configured on your server. Can you please confirm whether you have configured SMTP settings in Oxwall.

You can do the same at:
Login to Oxwall Admin page -> Settings -> Main Settings -> SMTP

Hope this helps you.

If you still face the issue can you please open a ticket here:
http://softaculous.com/support/]]>
Fri, 28 Aug 2015 07:53:08 GMT http://www.softaculous.com/board/index.php?tid=7980&tpg=1#p27674
<![CDATA[Ampps 3.3 Launched]]> http://www.softaculous.com/board/index.php?tid=7980&tpg=1#p27665 Thu, 27 Aug 2015 11:13:01 GMT http://www.softaculous.com/board/index.php?tid=7980&tpg=1#p27665 <![CDATA[Ampps 3.3 Launched]]> http://www.softaculous.com/board/index.php?tid=7980&tpg=1#p27664
Installed Oxwall and tried to register a trial user. After that i clicked ok after completing the registration form, I received the following info:

Error 500
Internal Server Error.
If you are the site admin, click here for details (+)
Something went wrong!
To get the error details follow these steps:
- Open ow_includes/config.php file and set DEBUG_MODE to true
- Reproduce your last action.
Error details:
Type:    Exception
Message:    Could not instantiate mail function.
File:    D:\Ampps\www\ow_libraries\php_mailer\class.phpmailer.php
Line:    1181
Trace:    #0 D:\Ampps\www\ow_libraries\php_mailer\class.phpmailer.php(1061): PHPMailer->mailSend('Date: Thu, 27 A...', '--b1_bc5c90f5c7...') #1 D:\Ampps\www\ow_libraries\php_mailer\class.phpmailer.php(966): PHPMailer->postSend() #2 D:\Ampps\www\ow_system_plugins\base\bol\mail_service.php(274): PHPMailer->send() #3 D:\Ampps\www\ow_core\mailer.php(97): BOL_MailService->send(Object(BASE_CLASS_Mail)) #4 D:\Ampps\www\ow_system_plugins\base\bol\email_verify_service.php(217): OW_Mailer->send(Object(BASE_CLASS_Mail)) #5 D:\Ampps\www\ow_system_plugins\base\bol\email_verify_service.php(244): BOL_EmailVerifyService->sendVerificationMail('user', Array) #6 D:\Ampps\www\ow_system_plugins\base\controllers\join.php(324): BOL_EmailVerifyService->sendUserVerificationMail(Object(BOL_User)) #7 D:\Ampps\www\ow_system_plugins\base\controllers\join.php(218): BASE_CTRL_Join->joinUser(Array, '290365aadde35a9...', Array) #8 D:\Ampps\www\ow_system_plugins\base\controllers\join.php(170): BASE_CTRL_Join->postProcess(Array) #9 [internal function]: BASE_CTRL_Join->joinFormSubmit(Array) #10 D:\Ampps\www\ow_core\request_handler.php(266): call_user_func_array(Array, Array) #11 D:\Ampps\www\ow_core\application.php(329): OW_RequestHandler->dispatch() #12 D:\Ampps\www\index.php(73): OW_Application->handleRequest() #13 {main}]]>
Thu, 27 Aug 2015 11:08:55 GMT http://www.softaculous.com/board/index.php?tid=7980&tpg=1#p27664
<![CDATA[Ampps 3.3 Launched]]> http://www.softaculous.com/board/index.php?tid=7980&tpg=1#p27659
We regret for the inconvenience caused to you.

In Ampps 3.3 we are giving Ioncube Loader v4.0.14 for PHP-5.3 but we have updated Ioncube Loader for PHP 5.4, 5.5 and 5.6
For PHP 5.4, PHP 5.5 and 5.6 we have given ioncube loader v5.0.8.

To enable Ioncube Loader Open PHP Configuration of the respected version.
AMPPS Control Panel --> PHP --> Configuration.

And add or uncomment following line.

zend_extension="{$path}\php\ioncube_loader_win_x.x.dll"

save and Restart Ampps.

Note x.x is PHP version.
For Eg: For PHP 5.4 the command shall be:
zend_extension="{$path}\php\ioncube_loader_win_5.4.dll"

For PHP-5.3 you can download ioncube loader from following link:
http://downloads3.ioncube.com/loader_downloads/ioncube_loaders_win_vc9_x86.zip

Extract it and copy it to /path/to/Ampps/php-5.3/

We will fix this in next update. ]]>
Thu, 27 Aug 2015 09:06:19 GMT http://www.softaculous.com/board/index.php?tid=7980&tpg=1#p27659
<![CDATA[Ampps 3.3 Launched]]> http://www.softaculous.com/board/index.php?tid=7980&tpg=1#p27650 Bullshit, it did not work with my dictory. It ruined my whole network, several weeks of work went down the drain., Thanks for the hopeless update. Never more this total meaninglessness software. Here it ubuntuserver now with the manual installation of Oxwall.  :squi:  :-( ]]> Wed, 26 Aug 2015 23:03:38 GMT http://www.softaculous.com/board/index.php?tid=7980&tpg=1#p27650 <![CDATA[Virtualizor 2.7.7 Launched]]> http://www.softaculous.com/board/index.php?tid=8008&tpg=1#p27633
The Virtualizor Team has released Virtualizor 2.7.7
This version has a new Admin interface as well as new features and some bug fixes.
The following is a list of changes in this version :

1) [Feature] The Admin Panel has been revamped and here are some of the screen shots :

Board Image

Board Image

Board Image

Board Image

Board Image

Board Image

Board Image

Board Image

2) [Feature] Migration for File / QCOW2 based VPS was not possible through the panel. Admins will now be able to migrate such VPS using the migration wizard.

3) [Feature] MTU option is now available while creating a new IP Pool so that users can limit the largest size of packet or frame in bytes.

4) [Feature] Option for enabling VGA and Acceleration has been added for KVM VPS. This option is now available in Advanced options in the Create VPS Wizard.

5) [Feature] Its now possible to search DNS records as per the Domain name and Zone type.

6) [Task] Multiple deletion of database backup is now added for ease of use.

7) [Task] We have added random password generator for new users while creating VPS.

8) [Task] The Rescue mode template has been upgraded from Debian 6.0 to Debian 8.1.

9) [Task] You can now use HTML tags like `br`, `p`, `b` and `i` in the OS Distro description.

10) [Task] Option to install CentOS Web Panel in addvs was not present in Advanced options of the VPS creation wizard. This has been added.

11) [Task] Option to add Hostmaster email and primary NameServer while adding DNS zone was not available. This is now added.

12) [Task] A Random password generator has been added while creating new Users in enduser panel for Cloud Users.

13) [Task] Added support for IPv6 rDNS records of a /48 Subnet which is broken down into /64 Subnets.

14) [Bug-Fix] Add/Edit Recipes option was not available to Admin users other than root because of missing ACL permissions. These are now added in Admin ACL.

15) [Bug-Fix] IPv4 and IPv6 validation was not there while adding a rDNS record in the Admin Panel.

16) [Bug-Fix] Character `_` was not allowed in Domain name for DNS records. This has been fixed.

17) [Bug-Fix] While creating a VPS using our SDK on Xen/XCP, the VPS created would be an HVM VPS only, this is now fixed.

18) [Bug-Fix] On devices with medium sized screens, the VPS manage section in the new Enduser UI used to show empty spaces in between. This is now fixed.

19) [Bug-Fix] Search on Media Groups, Server Groups and DNS records was not working properly. This is now fixed.

20) [Bug-Fix] Deletion of DNS record did not work in the the new Enduser UI. This is now fixed.

21) [Bug-Fix] Some English strings were hard coded in the new Enduser UI. This is now fixed for multi-language support.

22) [Bug-Fix] Special characters like Grave and Cedilla in language files of the new Enduser UI resulted in errors. This is now fixed.

23) [Bug-Fix] A Master-only server i.e. a Master installed with no Virtualization could use the create VPS wizard and the VPS creation would fail due to missing underlying virtualization kernels. VPS creation on such Masters is now restricted.

24) [Bug-Fix] In the new Enduser UI, closing the enduser panel tab in the browser without logging out didn't destroy the session (till the session timed out) which prevented accessing the panel later on without a Ctrl + F5. This now fixed.

25) [Bug-Fix] While rebuilding a VPS in the Admin Panel, both HVM and PV templates could be selected for Xen VMs. OS selection is now as per VPS type i.e. Xen PV or HVM.

26) [Bug-Fix] Different DNS plans could be created with the same name. Now no two DNS plans can have the same name.

27) [Bug-Fix] Media Group was set as 1, while creating VPS from SDK. This is now fixed to take other entries as well.

28) [Bug-Fix] Due to blank DISK entries in VPS tables, users were not able to edit VPS and faced `Primary Storage can not be changed`. This is now fixed.

29) [Bug-Fix] Secondary VPS disks were not getting deleted after deleting the VPS, IF the VPS was in a shutdown state. This is now fixed.

30) [Bug-Fix] Editing Slave storage on the Master resulted in late DB sync with the slave. This is now fixed and Master will perform an immediate sync with slave after a storage is edited.

31) [Bug-Fix] Running the windows template creation tool from CLI left a `WINTOOL` LV on the server on failure. It will now delete this LV.

32) [Bug-Fix] Admin users (non-root) were not able to delete Logs as Admin ACL for logs deletion was not working. Admins will now be able to delete logs from the panel if the ACL permission is set for such admins.

33) [Bug-Fix] When a Cloud user would edit a VPS, the VPS user used to display a wrong user at times. This is now fixed to display the correct owner of the VPS.

34) [Bug-Fix] In the Admin Panel, changing the Active Server from the top menu was causing a repost of data for the newly selected server. This is now fixed.

35) [Bug-Fix] The Zone SOA serial was not getting updated whenever a record was added to the DNS zone. This is now fixed.

36) [Bug-Fix] While locking the Master Server, errors used to be shown although the master used to get locked. This is now fixed.

Virtualizor supports OpenVZ, Xen, XenServer and Linux-KVM on CentOS and Ubuntu and they all can be managed from the Master. We are adding more features and if you have any suggestions, do let us know. We hope you enjoy this version of Virtualizor.

Regards,
The Virtualizor Team]]>
Tue, 25 Aug 2015 13:20:10 GMT http://www.softaculous.com/board/index.php?tid=8008&tpg=1#p27633
<![CDATA[Ampps 3.3 Launched]]> http://www.softaculous.com/board/index.php?tid=7980&tpg=1#p27523 The Softaculous AMPPS Team has released AMPPS 3.3


This version of AMPPS adds the latest versions of PHP. We have also added Ioncube Loader for all PHP versions and fixed some bugs in AMPPS.

AMPPS is a LAMP (Linux), WAMP (Windows) and MAMP (Macintosh) stack of
Apache, MySQL, MongoDB, PHP, Perl & Python. AMPPS enables you to
focus more on using applications rather than maintaining them on your
desktops.

A complete list of changes:

The current version of AMPPS for Windows include:

Softaculous 4.6.3
Apache 2.4.12
PHP 5.6.11, PHP 5.5.27, PHP 5.4.43 and 5.3.29
Ioncube Loader added for all PHP versions. 
PERL 5.16.3
Python 2.7.10 with mod_wsgi 3.5 module
MySQL 5.6.25
phpMyAdmin 4.4.11
SQLite Manager 1.2.4
MongoDB 3.0.4
RockMongo 1.1.7
FileZilla FTP Server 0.9.44

The current version of AMPPS for Mac include:

Softaculous 4.6.3
Apache 2.4.12
PHP 5.6.11, PHP 5.5.27, PHP 5.4.43 and 5.3.29
Ioncube Loader added for all PHP versions. 
PERL 5.20.2
Python 2.7.10 with mod_wsgi 3.5 module
MySQL 5.6.25
phpMyAdmin 4.4.11
SQLite Manager 1.2.4
MongoDB 2.6.7
RockMongo 1.1.7
Pure-FTPd Server 1.0.36

The current version of AMPPS for Linux include:

Softaculous 4.6.3
Apache 2.4.12
PHP 5.6.11, PHP 5.5.27, PHP 5.4.43 and 5.3.29
Ioncube Loader added for all PHP versions. 
PERL 5.22.2
Python 2.7.10 with mod_wsgi 3.5 module
MySQL 5.6.25
phpMyAdmin 4.4.11
SQLite Manager 1.2.4
MongoDB 3.0.4
RockMongo 1.1.7
Pure-FTPd Server 1.0.36

Regards,

The Softaculous AMPPS Team
   
    ]]>
Tue, 18 Aug 2015 11:50:17 GMT http://www.softaculous.com/board/index.php?tid=7980&tpg=1#p27523
<![CDATA[Softaculous is now the default auto installer in ISPmanager]]> http://www.softaculous.com/board/index.php?tid=7881&tpg=1#p27200 ISPmanager 5. Install 350+ apps like WordPress, Joomla, Drupal, etc with
ease from your IPSmanager 5 panel.

Thanks to an integration module developed by team ISPsystem in
collaboration with team Softaculous, the solution is available to all
ISPmanager 5 users.

Even if you are not an advanced ISPmanager 5 user, the web-script
installation process will become seamless, quick, simple, and secure for
you. All you need to do to start using this new functionality is to
activate the integration module within your ISPmanager 5 control panel,
after which it will become available in the “Additional Apps” section of
the control panel.

Server management without specialized administration skills is a
fundamental part of ISPmanager’s philosophy. Now, with Softaculous
included in ISPmanager as a plug-in, we can offer our clients the
highest level of ease and convenience for installation and managment of
applications!

Pavel Guralnik, VP of Business Development @ISPsystem

Softaculous is available as a free module for ISPmanager 5 (from
version 5.33) with 56 applications. By purchasing a premium version of
Softaculous through our BILLmanager you will gain access to 350+
web-scrips.

About ISPmanager

ISPmanager 5 Lite is a flexible web hosting control panel with the
perfect balance of functionality, usability and price. To this date the
panel has been already been installed on hundreds of thousands of
servers worldwide. With such features as multiple user roles, built-in
PHP selector, backup management system, data import from remote server
and many, many more great features, ISPmanager became a perfect solution
for both Dedicated and VPS server administration!

www.ispsystem.com
                    ]]>
Thu, 23 Jul 2015 12:08:41 GMT http://www.softaculous.com/board/index.php?tid=7881&tpg=1#p27200
<![CDATA[Virtualizor 2.7.6 Launched]]> http://www.softaculous.com/board/index.php?tid=7880&tpg=1#p27199
The Virtualizor Team has released Virtualizor 2.7.6
This version has some bug fixes and new features.
The following is a list of changes in this version :

1) [Feature] We have made new importers for HyperVM / Feathur based setups to migrate to Virtualizor with a few clicks. This feature is in Beta. The VPS will remain online during the import process and no VMs will need any reboot. The import process is similar to the SolusVM importer we have the. The following are the guides on how to import from HyperVM / Feathur :
HyperVM Import Guide : http://www.virtualizor.com/wiki/HyperVM_Import_Guide
Feathur Import Guide : http://www.virtualizor.com/wiki/Feathur_Import_Guide

2) [Feature] In this version the New Enduser UI will now be set as the default theme. However the Admin can disable the new Enduser UI from the Admin Panel -> Master Settings -> "Disable New Theme". The old Enduser UI will be supported till the 31st of January, 2016. We would like to thank all users who have helped us test and improve the new Enduser UI.

3) [Feature] We have made a new feature in this version called <strong>Recipes</strong>. Recipes are shell scripts / codes that the admin can create for use by the endusers. The Endusers will be able to choose these recipes and deploy them when the VPS is booted. This feature will be further improved in future versions of Virtualizor.

4) [Feature] We have made a new tool to update the New Master data across all Slaves. This tool is helpful if you are migrating a Virtualizor Master :
Wiki - http://virtualizor.com/wiki/Migrate_Master

5) [Task] The rDNS Utility in Virtualizor will now be able to save entries for /64 IPv6 subnets.

6) [Task] The virtnetwork script used to wait for 60 seconds before checking the network connectivity. This is now reduced to 30 seconds.

7) [Task] A new hook has been added  <b>after_deletevps()</b>. This hook will run after the deletion of a VPS.
Guide : http://www.virtualizor.com/wiki/Hooks#after_deletevps

8) [Task] A new done message has been added for some API actions in the VPS Management panel.

9) [Task] We have added Start, Stop, Restart, etc. options to the Edit VPS wizard. More options will be added in the future Virtualizor releases.

10) [BugFix] Database backup emails were not being sent due to a change in the latest PHP version. This is now fixed.

11) [BugFix] The Storage Space used was not calculated correntl on Xen PV nodes which had a Swap entry set for VMs. This is now fixed.

12) [BugFix] While Migrating Thin LVM based VPS, the disk type was not being filled causing the migration to fail. This is now fixed.
       
13) [BugFix] The disk space allocated to a Ploop based OpenVZ VPS was not being set correctly if a custom OS template was used. This is now fixed.

14) [BugFix] The API for editing the IPs was not working. This is now fixed.

15) [BugFix] If a cloud user was editing a VPS, the VPS root password was beinf set even if the VPS password field was empty. This is now fixed.

16) [BugFix] The text "Alt" was removed in the latest version of Xen which resulted in a Wrong Kernel error message to be displayed in Virtualizor. This is now fixed.

17) [BugFix] The Secondary ISO was not downloaded to a slave node if one of its VPS was having a secondary ISO. This is now fixed.

18) [BugFix] The /etc/fstab entry for VIRTIO based VMs was not setting correctly. This is now fixed.

19) [BugFix] While editing a slave server, the locking feature was not working. This is now fixed.

20) [BugFix] The "Turn off virt-df" setting was not shown in the Master Settings if the master was not KVM. This is now fixed.

Virtualizor supports OpenVZ, Xen, XenServer and Linux-KVM on CentOS and Ubuntu and they all can be managed from the Master. We are adding more features and if you have any suggestions, do let us know. We hope you enjoy this version of Virtualizor.

Regards,
The Virtualizor Team

]]>
Thu, 23 Jul 2015 07:47:05 GMT http://www.softaculous.com/board/index.php?tid=7880&tpg=1#p27199