https://www.softaculous.com/board/index.php?fid=1 https://www.softaculous.com/board/index.php?tid=22186&tpg=1#p62435
The change log for this release is as follows :-

[Security Fix] On one request more than required data was being sent, that has been fixed, Issue reported by Vaibhav Narkhede [WPScan]

[Bug-Fix] A Minor UI fix that was preventing user from going back from the form builder.

[Task] Tested with WordPress 7.1.

FormLayer team is working on improving the plugin. If you have any suggestions or feedback, then reach us at [email protected]

Regards,
FormLayer Team]]> Tue, 25 Aug 2026 11:08:49 GMT https://www.softaculous.com/board/index.php?tid=22186&tpg=1#p62435 https://www.softaculous.com/board/index.php?tid=22182&tpg=1#p62422
The changes are listed below :-

[Pro Feature] User enumeration protection, hiding unauthenticated access to username lists.

[Improvement Pro] Passwordless login, now have option to disable username based login and only allow login through email.

[Improvement Pro] The plugin now comes with Italian translations(it_IT).

[Bug-Fix Pro] Passwordless login, was not honoring Remember me on login, this has been fixed.

[Bug-Fix] There was a race condition happening in Bruteforce protection, that has been fixed.

The Loginizer team is working constantly to improve our product and if you have any feedback or suggestion you can write to us at [email protected]]]> Wed, 19 Aug 2026 15:35:34 GMT https://www.softaculous.com/board/index.php?tid=22182&tpg=1#p62422 https://www.softaculous.com/board/index.php?tid=22180&tpg=1#p62419
The Pagelayer team has launched version 2.1.8 this release contains new features, some bug fixes and improvements.
The change log for this release is as follows :-

1) [Bug-Fix] Added an XSS warning notice while editing posts and pages, and enhanced security checks.

Pagelayer team is working on improving the plugin. If you have any suggestions or feedback, then reach us at [email protected]

Regards,
Pagelayer Team]]> Mon, 17 Aug 2026 14:19:32 GMT https://www.softaculous.com/board/index.php?tid=22180&tpg=1#p62419 https://www.softaculous.com/board/index.php?tid=22177&tpg=1#p62415
We have released SiteSEO version 1.4.1, This is a minor release it contains some bug fixes and improvements.

The change log for this release is as follows :-

1. [Pro-Improvement] Improvement with WooCommerce product rating schema.
2. [Pro-Improvement] Added a Custom ID option for Local Business.
3. [Bug-Fix] Fixed an issue where sitemap pagination failed to list all posts on large sites.
4. [Bug-Fix] Fixed an issue where meta descriptions were not rendering on category, tag, and custom taxonomy pages.
5. [Bug-Fix] Fixed migration failures when importing data from other plugins on sites with a large number of posts.
6. [Task] Tested with WordPress 7.1

SiteSEO team is working on improving the plugin. If you have any suggestions or feedback, then reach us at [email protected]

Regards,
SiteSEO Team]]> Fri, 14 Aug 2026 13:16:03 GMT https://www.softaculous.com/board/index.php?tid=22177&tpg=1#p62415 https://www.softaculous.com/board/index.php?tid=22173&tpg=1#p62409
Now you can connect GoSMTP through MCP to any of the 7 harness listed below :-

1. Claude Desktop
2. Claude Code CLI
3. Antigravity
4. Gemini CLI
5. OpenCode
6. Cursor
7. VS Code

The change logs are as follows :-

[Pro-Feature] Support for Pro AI Abilities: List Email Logs, Export Email Logs, Get Log Details, Resend Email Logs, and Email Reports.

[Feature] Support for AI Abilities: Get Settings, List Mailers, and Send Test Email.

GoSMTP is working to improve the plugin and help you deliver emails.
If you have any suggestions or feedback, write to us at [email protected]

Regards,
GoSMTP Team
]]> Tue, 11 Aug 2026 15:38:29 GMT https://www.softaculous.com/board/index.php?tid=22173&tpg=1#p62409 https://www.softaculous.com/board/index.php?tid=22172&tpg=1#p62408
The Webuzo Team has released Webuzo version 4.7.5, which includes some improvements and bug fixes.

[Improvement] Improved the virtual host rebuild process to prevent multiple rebuild operations from running simultaneously. Concurrent rebuild requests are now queued and processed after the active rebuild completes, reducing unnecessary Apache reloads and ensuring the latest configuration changes are applied reliably.

[Improvement] Improved the reseller login process and session management for better reliability and stability.

[Bug-Fix] Improved the PHP-FPM monitoring cron to automatically restart PHP-FPM when a user's PHP socket is missing, ensuring affected websites recover automatically without manual intervention.


Launched in Release Candidate : (11-08-2026)
Launched in Stable : (13-08-2026)

Please stay tuned for more and if you have any suggestions, do let us know by emailing it to [email protected]


Regards,
The Webuzo Team]]> Tue, 11 Aug 2026 14:47:06 GMT https://www.softaculous.com/board/index.php?tid=22172&tpg=1#p62408 https://www.softaculous.com/board/index.php?tid=22170&tpg=1#p62406
This release introduces cPanel support, temporary Allow/Deny IP rules, and fully configurable DDoS protection settings. Whether you're managing a single server or hundreds of hosting accounts, these improvements make SecLayer even more powerful and easier to use.

What's New
cPanel Support

One of the most requested features is finally here.

SecLayer now supports cPanel, allowing hosting providers and server administrators to protect their cPanel servers with the same security and firewall capabilities available on other supported control panels.

Benefits:
- Easy installation on cPanel servers
- Seamless integration
- Enterprise-grade protection for shared hosting environments
Whether you're running a small VPS or a large hosting infrastructure, SecLayer now fits naturally into your cPanel workflow.

Temporary Allow/Deny IP Addresses

Managing IP access just became much easier.

Previously, IPs could only be permanently allowed or denied. With this release, administrators can now specify how long an IP should remain in the Allow or Deny list.

Examples include:
- Allow a developer's IP for 2 hours
- Temporarily block a suspicious IP for 24 hours
- Grant short-term access during maintenance
- Automatically remove expired entries without manual intervention

This feature helps keep firewall rules clean while reducing administrative effort.

Configurable DDoS Protection

SecLayer's DDoS protection is now much more flexible.

Administrators can fine-tune protection based on their infrastructure instead of relying on fixed values.

Configurable options include
- Check Interval
- Ban Time
- Connection Limit
- Detection thresholds
- Other protection parameters

This allows you to balance security and usability depending on your server workload.

For example:
- Aggressive protection for public-facing APIs
- Relaxed settings for high-traffic websites
- Custom tuning for gaming, hosting or enterprise environments
We'd Love Your Feedback

These features were developed based on community feedback, and we'd love to hear what you'd like to see next.

If you have feature requests, suggestions, or encounter any issues, please let us know. Your feedback helps shape the future of SecLayer.

Thank you for choosing SecLayer to protect your servers. We hope you enjoy this release!
Install Now : https://seclayer.net/docs/install
Visit Website : https://seclayer.net/

Regards,
The SecLayer Team]]> Tue, 11 Aug 2026 05:03:51 GMT https://www.softaculous.com/board/index.php?tid=22170&tpg=1#p62406 https://www.softaculous.com/board/index.php?tid=22169&tpg=1#p62404
The Deskuss team has released version 1.0.6.
The following is a list of changes :

1) [Added] Auto-Close: automatically close tickets inactive for a configurable number of days (default 7). Only tickets an agent has replied to are eligible for auto-close — unanswered tickets are never auto-closed.
2) [Added] New "Pending" ticket state with "In Progress" status to park tickets an agent is actively working on. Pending tickets are skipped by Auto-Close.
3) [Added] Auto-Close dry-run mode to log candidates without closing them.
4) [Added] "Auto-Close Notice" email template sent to the customer on auto-close (optional)

We will be launching many more changes in the upcoming version.

Regards,
The Deskuss Team]]> Sat, 08 Aug 2026 15:33:37 GMT https://www.softaculous.com/board/index.php?tid=22169&tpg=1#p62404 https://www.softaculous.com/board/index.php?tid=22168&tpg=1#p62401
The change log for this release is as follows :-

• [Pro Feature] Added end-user email confirmation feature.
• [Feature] Added form migration from other plugins.
• [Improvement] Added a placeholder for the Phone field.
• [Bug Fix] Fixed an issue where the text color of some premium fields could not be changed.

FormLayer team is working on improving the plugin. If you have any suggestions or feedback, then reach us at [email protected]

Regards,
FormLayer Team]]> Sat, 08 Aug 2026 04:13:13 GMT https://www.softaculous.com/board/index.php?tid=22168&tpg=1#p62401 https://www.softaculous.com/board/index.php?tid=22167&tpg=1#p62400
The Pagelayer team has launched version 2.1.7 this release contains new features, some bug fixes and improvements.
The change log for this release is as follows :-

1) [Feature] Added PageLayer MCP (Beta) feature.
2) [Bug-Fix] Added an XSS warning notice while editing posts and pages, and enhanced security checks.

Pagelayer team is working on improving the plugin. If you have any suggestions or feedback, then reach us at [email protected]

Regards,
Pagelayer Team]]> Fri, 07 Aug 2026 11:22:19 GMT https://www.softaculous.com/board/index.php?tid=22167&tpg=1#p62400