https://www.softaculous.com/board/index.php?fid=16 https://www.softaculous.com/board/index.php?tid=20424&tpg=1#p60059 Tue, 07 Oct 2025 12:11:51 GMT https://www.softaculous.com/board/index.php?tid=20424&tpg=1#p60059 https://www.softaculous.com/board/index.php?tid=20424&tpg=1#p60056
I'm new to Virtualizor and currently testing it during the trial. I followed the installation steps, added storage, set up the network interface, and created two CentOS 7 VPSes. Both built and started successfully, and I ran the cPanel install command on each.

However, I can't access either VPS via SSH or cPanel URL. My license is active with the email above. Could you help me figure out what's wrong with my setup? I plan to purchase if everything works well.]]> Tue, 07 Oct 2025 07:27:45 GMT https://www.softaculous.com/board/index.php?tid=20424&tpg=1#p60056 https://www.softaculous.com/board/index.php?tid=20396&tpg=1#p60044 Thu, 02 Oct 2025 02:14:55 GMT https://www.softaculous.com/board/index.php?tid=20396&tpg=1#p60044 https://www.softaculous.com/board/index.php?tid=20408&tpg=1#p60036
May I know how are you checking in container ?

Also are you looking for any specific option which is showing up on Proxmox panel but not visible on Virtualizor panel ?]]> Fri, 26 Sep 2025 11:24:19 GMT https://www.softaculous.com/board/index.php?tid=20408&tpg=1#p60036 https://www.softaculous.com/board/index.php?tid=20408&tpg=1#p60034 I am using Virtualizor with Proxmox server, and I created LXC based servers, but I am not getting TUN/TAB enabled on the vps which I created.
Can anyone help me on this ?]]> Fri, 26 Sep 2025 07:55:49 GMT https://www.softaculous.com/board/index.php?tid=20408&tpg=1#p60034 https://www.softaculous.com/board/index.php?tid=20394&tpg=1#p60014 By default, both servers are installed as standalone Masters. To make the second server a Slave, add it to your existing Master using the wiki guide. Once added, it will automatically become a Slave.https://www.virtualizor.com/docs/admin/server-clustering/#add-server-on-master
If you encounter any issues during the process, you can open a ticketLink to open a support ticket with Virtualizor :
https://softaculous.deskuss.com/open.php?topicId=2]]> Tue, 16 Sep 2025 20:19:58 GMT https://www.softaculous.com/board/index.php?tid=20394&tpg=1#p60014 https://www.softaculous.com/board/index.php?tid=20394&tpg=1#p60013

Sprunki Game

]]> Tue, 16 Sep 2025 08:19:20 GMT https://www.softaculous.com/board/index.php?tid=20394&tpg=1#p60013 https://www.softaculous.com/board/index.php?tid=20396&tpg=1#p60010 You can refer to the wiki below to create a permanent bridge.https://www.virtualizor.com/docs/admin/kvm-bridge/#ubuntu-network-interface-file

Please let us know if you face any issues.]]> Sat, 13 Sep 2025 22:48:22 GMT https://www.softaculous.com/board/index.php?tid=20396&tpg=1#p60010 https://www.softaculous.com/board/index.php?tid=20396&tpg=1#p60009
# Hetzner + Virtualizor Bridge - Alternative approach
network:
  version: 2
  renderer: networkd
  ethernets:
    enp6s0:
      dhcp4: no
      # Note: NOT setting dhcp6: no (matching Virtualizor demo)
     
  bridges:
    viifbr0:
      interfaces: [enp6s0]
      addresses:
        - 167.235.159.185/32
        - 2a01:4f8:2220:1d6f::2/64
      routes:
        - on-link: true
          to: 0.0.0.0/0
          via: 167.235.169.65
      gateway6: fe80::1
      nameservers:
        addresses:
          - 185.12.64.1
          - 2a01:4ff:ff00::add:2
          - 185.12.64.2
          - 2a01:4ff:ff00::add:1
      # NOT setting macaddress - let it inherit from enp6s0
      parameters:
        stp: false
        forward-delay: 0]]> Sat, 13 Sep 2025 21:42:30 GMT https://www.softaculous.com/board/index.php?tid=20396&tpg=1#p60009 https://www.softaculous.com/board/index.php?tid=20395&tpg=1#p60008
As your vps is suspended at a specific time, can you check the server logs at the same time under /var/log/messages or /var/log/syslog.]]> Sat, 13 Sep 2025 21:36:55 GMT https://www.softaculous.com/board/index.php?tid=20395&tpg=1#p60008