Hetzner VPS creation IPV4 with IPV6

Mon, 04 Jan 2021 01:18:41 GMT

Quote From : enginama August 28, 2020, 10:38 am

Wanna share on what you did?

sure.

create a ipv6 pool and add a ipv6 to vps

change ipv6 network settings (eth0 or whatever you have)

set ipv6-address so i ends with 2!! (like 2001:db8:dead:beef:fe::2)
set netmask to 128 (see hetzner docs)

make sure you have net.ipv6.conf.all.forwarding=1 in your /etc/sysctl.conf !!!

we need to add a ipv6 to nat bridge
(check it with ifconfig)

virsh net-destroy natbrxx
virsh net-edit natbrixx

and add (prefix has to be 64!!!)

save and reboot
Thats it.

Hetzner VPS creation IPV4 with IPV6

Mon, 04 Jan 2021 00:51:07 GMT

Quote From : jevingala May 18, 2020, 1:19 pm

Hi,

For now its not possible.
It will require 2 NICs in vps since both the ips are coming from different bridge on server.

Your wrong. it's working just fine....

Hetzner VPS creation IPV4 with IPV6

Fri, 28 Aug 2020 10:38:25 GMT

Wanna share on what you did?

Hetzner VPS creation IPV4 with IPV6

Fri, 28 Aug 2020 02:59:56 GMT

Got it working again. One nic with ipv4 and ipv6 hetzner subnets.

Hetzner VPS creation IPV4 with IPV6

Fri, 28 Aug 2020 01:59:45 GMT

Correct,

Virtualizor Version 3.x is not allowing ipv6 anymore.
It worked very well on older version

But now, i just restarted my vps system and ipv6 is not working anymore.. BIG THANKS TO VIRTUALIZOR

Hetzner VPS creation IPV4 with IPV6

Mon, 18 May 2020 13:19:04 GMT

Hi,

For now its not possible.
It will require 2 NICs in vps since both the ips are coming from different bridge on server.

Sun, 17 May 2020 13:15:19 GMT

Hi,
On using the Hetzner IPV4 subnet (NAt'd) and with IPV6(routed).When creating a VPS with an IPV4 from the subnet & an IPV6 from the IPV6 subnet the IPV6 is not pingable.
Does anyone know how I can make the VPS to recognize both?I'm assuming I need to create a recipe to create a bridge in the VPS to configure the IPV6 so it works.But really not sure what I need to do, to get this to all work together.
thanks
Enginama