https://www.softaculous.com/board/index.php?tid=17459 https://www.softaculous.com/board/index.php?tid=17459&tpg=1#p52049
Virtualizor creates a bridge(viifbr0) using virtnetwork service.
What you can do is create a permanent bridge, as per this guide, with ipv4 and ipv6 in it and avoid virtnetwork service and then check :

https://www.virtualizor.com/docs/admin/kvm-bridge/#making-the-bridge-permanent]]> Thu, 11 Feb 2021 09:11:00 GMT https://www.softaculous.com/board/index.php?tid=17459&tpg=1#p52049 https://www.softaculous.com/board/index.php?tid=17459&tpg=1#p52046 So... How to set up the bridge for IPV6

my /etc/sysconfig/network-scripts/ifcfg-intbr0:
DEVICE=intbr0
ONBOOT=yes
TYPE=Bridge
BOOTPROTO=static
IPADDR=192.168.1.1
NETMASK=255.255.255.0
]]> Wed, 10 Feb 2021 14:38:42 GMT https://www.softaculous.com/board/index.php?tid=17459&tpg=1#p52046 https://www.softaculous.com/board/index.php?tid=17459&tpg=0#p52045
When I try to install Virtulizor on the server, ipv6 becomes unavailable.
Just like This:
PING google.com(dfw28s23-in-x0e.1e100.net (2607:f8b0:4000:817::200e)) 56 data bytes
From server (2610:150:8000:db::44:55) icmp_seq=1 Destination unreachable: Address unreachable

However, it is available before installation, and I had checked the ifcfg-eth0 didnt have any change at all...
I have tried many times but still the same problem, wish you can help me, thank you a lot.

]]> Wed, 10 Feb 2021 13:29:34 GMT https://www.softaculous.com/board/index.php?tid=17459&tpg=0#p52045