https://www.softaculous.com/board/index.php?tid=18401 https://www.softaculous.com/board/index.php?tid=18401&tpg=1#p55859 PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=none
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes tunnel rush
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
NAME=eno1
UUID=124c10d3-1647-4c0b-8393-ec59fe4aef82]]> Wed, 21 Dec 2022 13:31:54 GMT https://www.softaculous.com/board/index.php?tid=18401&tpg=1#p55859 https://www.softaculous.com/board/index.php?tid=18401&tpg=1#p55635 Sun, 30 Oct 2022 09:25:11 GMT https://www.softaculous.com/board/index.php?tid=18401&tpg=1#p55635 https://www.softaculous.com/board/index.php?tid=18401&tpg=1#p54833

Using the range 2 - 262144 for CPU units options will help in starting the VPS.]]> Mon, 16 May 2022 13:51:35 GMT https://www.softaculous.com/board/index.php?tid=18401&tpg=1#p54833 https://www.softaculous.com/board/index.php?tid=18401&tpg=0#p54830
I created a virtualizor server.
1. Virtualizor server IP : 12x.xxx.43.104 Gateway : 12x.xxx.43.97 Sub: /28
2. Storage (not formatted):
  ---Volume groups ---
  VG Name : vgvps
  Format : lvm2
  VG Size : <1.82 TiB
  PE Size : 4.00 MiB
  Total PE : 476870
  Alloc PE / Size : 0 / 0
  Free PE / Size : 476870 / <1.82 TiB

3. /etc/sysconfig/network-scripts/ifcfg-eno1
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=none
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
NAME=eno1
UUID=124c10d3-1647-4c0b-8393-ec59fe4aef82
DEVICE=eno1
ONBOOT=yes
IPADDR=12x.xxx.43.104
PREFIX=28
GATEWAY=12x.xxx.43.97
DNS1=8.8.8.8
DNS2=1.1.1.1
DNS3=8.8.4.4
DOMAIN=xx.xxx
IPV6_PRIVACY=no

4. Network settings:
Network Interface : eno1
  HAProxy Settings
HAProxy Source IPs : 12x.xxx.43.104

5. Service virtual network start
Bringing up viifbr0 - OK
Waiting for 10 seconds...1...2...3...4...5...6...7...8...9...10
Internet connectivity check successful viifbr0 - OK

6. IP pool
IP 206 /24 [Group] Default IPv4 No No No 256 0 256 0 (0 Free)
IP : 103.xxx.20x.0/24

List of IPs:
103.xxx.20x.0-255
12x.xxx.43.98
12x.xxx.43.99
12x.xxx.43.100
12x.xxx.43.101

7. Create a VPS + Plan1 (1 CPU + 1GB Memory)
IP : 12x.xxx.43.98 or 103.xxx.20x.3
Errors :
The following errors were found :
There was an error while starting the new VPS
setlocale: No such file or
directoryerror: Failed to create domain from /etc/libvirt/qemu/v1001.xmlerror: unsupported configuration: Value of cputune 'shares' must be in range [2, 262144]

What should I do ..?]]> Mon, 16 May 2022 03:18:49 GMT https://www.softaculous.com/board/index.php?tid=18401&tpg=0#p54830