KVM on Hetzner Dedicated https://www.softaculous.com/board/index.php?tid=8478 <![CDATA[KVM on Hetzner Dedicated]]> https://www.softaculous.com/board/index.php?tid=8478&tpg=1#p45408
Make sure in Robot at Hetzner that you open ports 2000 +1 for each VPS. example 2000 2001,2002, 2003, is for 3 VPS's This will cure the DNS problem.  Hope this helps. No amount of twiddling with network/interfaces or Name servers will work unless these ports are open in ROBOT....]]> Sun, 24 Mar 2019 07:25:18 GMT https://www.softaculous.com/board/index.php?tid=8478&tpg=1#p45408 <![CDATA[KVM on Hetzner Dedicated]]> https://www.softaculous.com/board/index.php?tid=8478&tpg=1#p29223
Quote
Sorry for Late reply.

According to NAT guide it says single ips cannot be added  and I have single IPs. I did not buy a subnet.



Currently I configured Proxmox VE and it works using bridge (vmbr0).
But I would like to use virtualizor as it has nice UI and much easier
to use.

We kinda have install OS many times a day on VPS and installing on Proxmox takes time but its like a flash on virtualizor.

I will buy a subscriptions as soon as I get it running.


You can create an IP pool for your single IPs as well in virtualizor.
Just specify the IPs settings as shown on Hetzner panel in the IP pool in virtualizor.
Also you will need to generate MAC IDs for your IPs on your hetzner panel and assign them to the IPs in Virtualizor.

If you are unable to do so then please open a support ticket and provide us the access we will configure the IPs for you.
]]> Mon, 28 Dec 2015 06:44:14 GMT https://www.softaculous.com/board/index.php?tid=8478&tpg=1#p29223 <![CDATA[KVM on Hetzner Dedicated]]> https://www.softaculous.com/board/index.php?tid=8478&tpg=1#p29222
Quote From : asim_shaikh December 26, 2015, 7:10 am
Hi,

Did you configure the IP pool according to our guide for hetzner servers  ?

http://virtualizor.com/wiki/NAT

You do not require MAC for VPSs on hetzner servers.



Sorry for Late reply.
According to NAT guide it says single ips cannot be added  and I have single IPs. I did not buy a subnet.

Currently I configured Proxmox VE and it works using bridge (vmbr0). But I would like to use virtualizor as it has nice UI and much easier to use.
We kinda have install OS many times a day on VPS and installing on Proxmox takes time but its like a flash on virtualizor.
I will buy a subscriptions as soon as I get it running.    ]]> Sun, 27 Dec 2015 17:48:38 GMT https://www.softaculous.com/board/index.php?tid=8478&tpg=1#p29222 <![CDATA[KVM on Hetzner Dedicated]]> https://www.softaculous.com/board/index.php?tid=8478&tpg=1#p29194
Did you configure the IP pool according to our guide for hetzner servers  ?

http://virtualizor.com/wiki/NAT

You do not require MAC for VPSs on hetzner servers.

]]> Sat, 26 Dec 2015 07:10:43 GMT https://www.softaculous.com/board/index.php?tid=8478&tpg=1#p29194 <![CDATA[]]> https://www.softaculous.com/board/index.php?tid=8478&tpg=0#p29182 I have a hetzner root server with 2 additional IPs with individual MAC address.
I installed ubuntu 14.04 + virtualizor KVM on it.
Can somebody kindly help me with IP configuration.
What I did was:
I added the IP + MAC address in new pool Gateway, Netmask as provided by Hetner.

Then I created a VPS. The VPS is pingable from host server but not from outside.
I ssh into VPS from host server and tried pinging google and was successful.

Kindly help me ]]> Fri, 25 Dec 2015 08:06:41 GMT https://www.softaculous.com/board/index.php?tid=8478&tpg=0#p29182