| Posted By: multihosting on May 23, 2018, 8:32 am |
|
Hello,
our knowledge on ipv6 is limited so i would like some input on this matter. The slave server's configuration is as follows: cat /etc/network/interfaces ### Hetzner Online GmbH - installimage # Loopback device: auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address 136.xxx.110.xxx netmask 255.255.255.192 gateway 136.xxx.110.xxx # default route to access subnet iface eth0 inet6 static address 2a01:xxxx:171:xxxx::2 netmask 64 gateway fe80::1 Information from Hetzner: 2a01:xxxx:171:xxxx:: / 64 Ip that we want to assign to the VPS: 2a01:xxxx:171:xxxx:xxx:xx:xxx:71c9 We are able to ping both on rescue system but when we reboot the server on virtualizor software we can only ping the 2a01:xxxx:171:xxxx::2 . Settings in virtualizor are below: We create an IPv6 Pool with Gateway 2a01:4f8:171:1120::1/64 and we can see the ipv6 available in our VPS's control panel. Do we have to complete any other step? Thank you for your time and sorry for the noobie question. Kind Regards ----------------------- hostivate.com VPS hosting services |
| Posted By: jevingala on May 25, 2018, 9:09 am | Post: 1 |
|
Hi,
Please try to set the ipv6 ip of your server as gateway of the ip pool as and then check. ----------------------- Regards, Virtualizor Team. http://virtualizor.com/ |
| Posted By: multihosting on May 28, 2018, 10:28 am | Post: 2 |
|
Hello,
thank you for your reply. The only information we have from hetzner regarding the IPv6 is the following subnet: 2a01:4f8:171:1120:: / 64 Gateway: fe80::1 Netmask: ffff:ffff:ffff:ffff:: Could you point out the gateway you are suggesting please? At the moment we use 2a01:4f8:171:1120::1 Kind Regards ----------------------- hostivate.com VPS hosting services |
| Posted By: jevingala on May 29, 2018, 6:58 am | Post: 3 |
|
Hi,
If you have added 2a01:4f8:171:1120::2 on your server and its working fine, then the gateway for the ip pool should be 2a01:4f8:171:1120::2 ----------------------- Regards, Virtualizor Team. http://virtualizor.com/ |
| Posted By: multihosting on May 29, 2018, 1:07 pm | Post: 4 |
|
Hello,
thank you for your reply. We have changed the gateway to 2a01:4f8:171:1120::2. Though the problem is that the IPv6 of the server is unreachable from the outside anyway so the gateway of the pool doesn't really matter at this point. When we booted the server from rescue OS the IPv6 was pingable so it seems like the problem is related to Virtualizor and its settings. Kind Regards ----------------------- hostivate.com VPS hosting services |
| Posted By: jevingala on May 29, 2018, 1:10 pm | Post: 5 |
|
Hi,
Can you please create a permanent bridge settings for viifbr0 and then check if ipv6 works on your server or not.Maybe this guide can be useful for you to create a bridge file: https://help.ubuntu.com/community/NetworkConnectionBridge ----------------------- Regards, Virtualizor Team. http://virtualizor.com/ |
| Posted By: jevingala on June 9, 2018, 6:35 am | Post: 7 |
|
Hi,
Did you tried creating a permanent bridge file on your server and checked ? ----------------------- Regards, Virtualizor Team. http://virtualizor.com/ |