Help on Hetzner IPV6 https://www.softaculous.com/board/index.php?tid=16108 <![CDATA[Help on Hetzner IPV6]]> https://www.softaculous.com/board/index.php?tid=16108&tpg=1#p48515
/etc/sysconfig/network-scripts/ifcfg-enp2s0
Code
DEVICE=enp2s0
BOOTPROTO=none
ONBOOT=yes
HWADDR=08:60:6E:46:FB:46 ---> main mac address
BRIDGE=viifbr0
IPV6INIT=yes

/etc/sysconfig/network-scripts/ifcfg-viifbr0
Code
DEVICE=viifbr0
BOOTPROTO=none
ONBOOT=yes
HWADDR=08:60:6E:46:FB:46 ---> main mac address again
IPADDR=144.76.56.xx ---> main ip address
NETMASK=255.255.255.224
SCOPE="peer 144.76.56.xx" ---> main gateway
IPV6INIT=yes
IPV6ADDR=2a01:4f8:a0:214a::2
IPV6_DEFAULTGW=fe80::1
IPV6_DEFROUTE=yes
IPV6_DEFAULTDEV=viifbr0


/etc/sysconfig/network-scripts/ifcfg-viifbr0:1
Code
DEVICE=viifbr0:1
TYPE=Bridge
BOOTPROTO=static
IPADDR=136.243.212.xx ---> first usable ip from additional subnet
NETMASK=255.255.255.224 ---> netmask from subnet
ONBOOT=yes
DELAY=0
STP=off


/etc/sysconfig/network-scripts/route-viifbr0
Code
ADDRESS0=0.0.0.0
NETMASK0=0.0.0.0
GATEWAY0=144.76.56.xx ---> main ip gateway

/etc/sysctl.d/10-no-icmp-redirects.conf
Code
net.ipv4.conf.all.send_redirects=0
net.ipv4.conf.default.send_redirects=0
net.ipv4.conf.br0.send_redirects=0
net.ipv4.conf.virbr0.send_redirects=0


Restart the network service
Addition: Apparently not a good idea as Hetzner don't approve of bridging networks like this for subnets as it exposes system made MAC addresses.
]]> Sat, 01 Feb 2020 20:32:33 GMT https://www.softaculous.com/board/index.php?tid=16108&tpg=1#p48515 <![CDATA[]]> https://www.softaculous.com/board/index.php?tid=16108&tpg=0#p48475
Update: Now got IPv6 partially working BUT only on the vps's that are NOT using the IPV4 NAT subnet. So individual added IPV4's for which you can buy 6 from hetzner those are setup routed not NAT and they work with the IPV6 subnets but the NAT subnets don't.Have a ticket into support but don't seem to be responding.

]]> Thu, 23 Jan 2020 21:33:29 GMT https://www.softaculous.com/board/index.php?tid=16108&tpg=0#p48475