News and Announcements (Softaculous) https://www.softaculous.com/board/index.php?fid=1 <![CDATA[Softaculous 5.0.4 Released]]> https://www.softaculous.com/board/index.php?tid=14235&tpg=1#p42531
Sorry for the delay in response.

I have just checked the ticket and it seems the Clone is working fine with the test account.

Can you please check if you are still facing the issue ? ]]>
Thu, 14 Jun 2018 06:49:12 GMT https://www.softaculous.com/board/index.php?tid=14235&tpg=1#p42531
<![CDATA[Softaculous 5.0.4 Released]]> https://www.softaculous.com/board/index.php?tid=14235&tpg=1#p42525 Being able to have the functionality of cloning in this software is vital to our company being able to deploy and stage numerous sites everyday so this communication is important.   


]]>
Tue, 12 Jun 2018 19:26:54 GMT https://www.softaculous.com/board/index.php?tid=14235&tpg=1#p42525
<![CDATA[Softaculous 5.0.4 Released]]> https://www.softaculous.com/board/index.php?tid=14235&tpg=1#p42523 Tue, 12 Jun 2018 17:19:28 GMT https://www.softaculous.com/board/index.php?tid=14235&tpg=1#p42523 <![CDATA[Softaculous 5.0.4 Released]]> https://www.softaculous.com/board/index.php?tid=14235&tpg=1#p42520
Can you please open a support ticket with a test cPanel account login details :
https://softaculous.com/support

We will check it asap. ]]>
Tue, 12 Jun 2018 15:54:03 GMT https://www.softaculous.com/board/index.php?tid=14235&tpg=1#p42520
<![CDATA[Softaculous 5.0.4 Released]]> https://www.softaculous.com/board/index.php?tid=14235&tpg=1#p42519
It appears this bug is still active and has not been resolved - at least for my team. Can you confirm if this is still an issue or is still affecting installations?]]>
Tue, 12 Jun 2018 15:51:59 GMT https://www.softaculous.com/board/index.php?tid=14235&tpg=1#p42519
<![CDATA[SitePad 1.1.0 Released]]> https://www.softaculous.com/board/index.php?tid=14173&tpg=1#p42507 Also, you can check the documentation for Plans here
]]>
Mon, 11 Jun 2018 14:44:05 GMT https://www.softaculous.com/board/index.php?tid=14173&tpg=1#p42507
<![CDATA[Softaculous 5.0.4 Released]]> https://www.softaculous.com/board/index.php?tid=14235&tpg=1#p42506
The Softaculous Team has released Softaculous 5.0.4

1) [Bug Fix] : On cPanel servers with MultiPHP disabled the error "Installation cannot proceed because the following files already exist in the target folder" occurred even when there were no files that already exists. This bug was introduced in Softaculous 5.0.3 which was released on 9th June 2018. This is fixed now.


Regards,
The Softaculous Team]]>
Mon, 11 Jun 2018 11:49:24 GMT https://www.softaculous.com/board/index.php?tid=14235&tpg=1#p42506
<![CDATA[Softaculous 5.0.3 Released]]> https://www.softaculous.com/board/index.php?tid=14227&tpg=1#p42491
The Softaculous Team has released Softaculous 5.0.3

1) [Bug Fix] : On some servers where cPanel was installed and the server had the Directadmin folder (/usr/local/directadmin) caused an "Child failed to make LIVEAPI connection" error. This is fixed now.


Regards,
The Softaculous Team]]>
Sat, 09 Jun 2018 13:16:19 GMT https://www.softaculous.com/board/index.php?tid=14227&tpg=1#p42491
<![CDATA[Softaculous 5.0.2 Released]]> https://www.softaculous.com/board/index.php?tid=14206&tpg=1#p42423
The Softaculous Team has released Softaculous 5.0.2

1) [Bug Fix] : On cPanel servers with LiteSpeed installed and using lsapi PHP Handler in MultiPHP, the .htaccess file was written incorrect causing the installation not to work. This has been fixed. This was due to a bug introduced in Softaculous 5.0.1 which was released on 31st May 2018.


Regards,
The Softaculous Team]]>
Mon, 04 Jun 2018 14:16:59 GMT https://www.softaculous.com/board/index.php?tid=14206&tpg=1#p42423
<![CDATA[Virtualizor 2.9.6 Launched (Release Branch)]]> https://www.softaculous.com/board/index.php?tid=14195&tpg=1#p42397
The Virtualizor Team has released Virtualizor 2.9.6
In this version we have added some revolutionary features like Cloud Billing system, CEPH storage and many more.
Here is the change list :

1) [Feature] Virtualizor will now have the capability to do all invoicing via our new Cloud Billing feature. A user can register an account and add funds into his / her account. The user can then create VMs and delete them at his will.
We have also added HOURLY BILLING support and all this can be done from the Virtualizor Panel itself.
Please refer to the following guide for setting up Cloud billing :
http://virtualizor.com/wiki/Virtualizor_Cloud_Billing_System
NOTE: Cloud Billing is in public Beta.

Also, the enduser experience for cloud billing has been documented :
https://virtualizor.com/wiki/Cloud_Billing_Enduser_Experience

2) [Feature] Added CEPH storage support. Here is the guide to setup CEPH cluster and use it in Virtualizor :
https://www.virtualizor.com/wiki/Add_New_Storage#Create_Storage_3

3) [Feature] Added Migrate Master utilityso that you can elect any slave as a new Master OR shift the Master Only Node to a new Node :
https://virtualizor.com/wiki/Migrate_Master_New

4) [Feature] Added support for migration of VMs from OpenVZ 6 to OpenVZ 7. You can now migrate your old OpenVZ 6 to the new OpenVZ 7 platform.

5) [Feature] Now while rebuilding the VM or Reinstalling the OS from the Enduser panel, only primary disk will be formatted if "Format Primary disk" is checked. By default it will format all the disks of the VM.

6) [Feature] Added integrity check for Remote Backups. This will ensure that the backup was completed successfully and correctly.

7) [Feature] Now Virtualizor supports Backup / Restore of VMs with Multiple disk(s). Previously it was taking backup of Primary disk only.

8) [Feature] Virtio disk driver option added for Proxmox KVM. This gives better disk I/O for VMs.

9) [Feature] Template creation added for Openvz 7 VMs and CTs.

10) [Feature] Backup features added for OpenVZ 7 VMs and CTs.

11) [Feature] Now TC rules on OpenVZ VMs will be applied on live VM.

12) [Feature] Admins can set the email notification threshold for bandwidth usage of VMs as well. However, the enduser threshold will be given first preference.

13) [Feature] Users can now specify a email notification threshold for bandwidth usage of their VMs. By default it will be 80% for all VMs.

14) [Feature] Added setting in Admin Panel to disable VGA option in VPS configuration wizard in Enduser Panel. It can
be disabled from Admin Panel -&gt; Master setting -&gt; Enduser Settings section -&gt; Disable VGA option

15) [Feature] Added IPv6 network throttling for all virtualizations. Speed capping will be applied to IPv6 as well.

16) [Feature] Secondary ISO support added for OpenVZ 7 KVM VMs.

17) [Feature] Added option to add a NOTE for an IP Address. Admin can add a note for any IP Addresses from the Admin Panel -&gt; List IPs -&gt; Edit any IP -&gt; There you will find the field for adding a note for that IP.

18) [Feature] Added Timezone selection option for VMs from Enduser Panel -&gt; VPS configuration -&gt; Select VPS Timezone. This will require stop and start of the VPS.

19) [Feature] Now IP Pools can be selected while making VPS Plans. This will enable Admins to select particular IPs for particular regions.

20) [Task] Now IPv6 subnet(s) will have correct netmask prefix and routing options if a VPS has only IPv6 subnet(s) assigned to it.

21) [Task] Cron emails sent to the Admin will have the server Hostname with IP address in any email wherever applicable.

22) [Task] Updated NoVNC client library to latest version. This brings in a better user experience.

23) [Task] Add Storage wizard improved to show information related to the storage type chosen.

24) [Task] Now OpenVZ KVM VM will be created with virtio disk drivers. Before it was creating with scsi-virtio and due to that windows ISOs were not getting loaded.

25) [Task] KVM VMs with internal IPs will have MAC address assigned to internal IPs as well. Before it was not assigning the MAC address to internal IPs.

26) [Task] From version 2.9.6 if VM fails to suspend, Virtualizor will power off the VMs.

27) [Task] Added Storage Overcommit handler for OLD WHMCS module. This was causing the issue for those users who are still using OLD WHMCS (V1) Module. For this users need to update the WHMCS module.

28) [Task] Added utility to disable Two Factor Authentication for ROOT. Here is the guide to the same :
https://virtualizor.com/wiki/Enable/Disable_Two_Factor_Authentication#Disable_for_root

29) [Task] Added Speed Cap column in VPS statistics wizard. This will show that the VM(s) has speed capping or not.

30) [Task] Allowed email addresses to start with an underscore '_'.

31) [Task] Enduser ListVS - removed VPS Name as it used to create confusion.

32) [Bugfix] OpenVZ 6 Containers and OpenVZ 7 KVM VMs Hostname issue has been fixed.

33) [Bugfix] While editing the VMs from Manage VPS wizard, internal IPs were getting removed (if any). This is fixed.

34) [Bugfix] Rescue mode Enable/Disable was not working from API calls. This is fixed.

35) [Bugfix] OpenVZ 7 CT creation was giving error as "OS template not found". This is fixed now.

36) [Bugfix] Proxmox was not working if cluster setup was made on internal network. Now API calls will be made on 127.0.0.1 thus resolving the issue.

37) [Bugfix] On Xen, network of any random VPS was not working while updating network rules for one VPS. This is fixed.

38) [Bugfix] Ebtable rules were not getting removed on some servers creating duplicate rules. This is fixed.

39) [Bugfix] On Centos 7+ Host Nodes, while unsuspending the VM which is already unsuspended was causing restart of the VM. This is fixed.

40) [Bugfix] After reinstalling the OS, MAC of the VM was getting changed and causing network issues. Now MAC will not be changed after reinstalling OS.

41) [Bugfix] On XEN CPU% parameter for guest was not set due to wrong config name in configuration file. This is fixed.

42) [Bugfix] On some XenServers, finding guest_tool.iso was taking some time due to which VM provisioning was also taking time. This is fixed.

43) [Bugfix] On OpenVZ 7, autostart setting (on node reboot) for CT was not working. This is fixed.

44) [Bugfix] On OpenVZ 7 if OS Template was not there from which the VM is created, Virtualizor was giving error of OS template not found while editing the VM. This is fixed.

45) [Bugfix] On Ubuntu 16.04 host, OS Services wizard in Admin panel was not working. This is fixed.

46) [Bugfix] If Windows VM had different username (i.e. Other than Administrator) and created VM was on Slave server, at that time Virtualizor was not able to change the password for that VM. This is fixed.

47) [Bugfix] On Amdin panel, Forgot Password email template was showing blank fields. This is fixed.

48) [Bugfix] From enduser panel, while reinstalling the OS, password was not getting set for special characters in password. This is fixed.

49) [Bugfix] ACL option for Enduser ISO was not there in ACL wizard in Admin Panel. This is fixed.

50) [Bugfix] HA Proxy rules were not getting applied for the VMs which were created on Slave servers. This is fixed.

51) [Bugfix] HA Proxy rules were not working if applied for a domain when a subdomain of the same domain was added. The requests were forwarded to the IP of the subdomain. This is fixed.

52) [Bugfix] Proxmox LXC containers with file storage were not getting started due to wrong disk name. This is fixed.

53) [Bugfix] IPv6 was not working for OpenVZ 7 VMs IF speed capping was enabled. This is fixed.

Virtualizor supports OpenVZ, OpenVZ 7, Xen, XenServer, LXC and Linux-KVM on CentOS and Ubuntu and they all can be managed from the Master. We are adding more features and if you have any suggestions, do let us know. We hope you enjoy this version of Virtualizor.

Regards,
The Virtualizor Team]]>
Fri, 01 Jun 2018 14:57:15 GMT https://www.softaculous.com/board/index.php?tid=14195&tpg=1#p42397