Hi, Im new to Virtualizor but have 15 years in the IT and Virtualisation industry mainly working with HyperV and ESXi.
I am setting up a system on my local network before I purchase servers with Hetzner.
I have tried following this guide to setting up a NAT IP pool which is what I think I need to give my VMs a network connection. https://www.virtualizor.com/docs/admin/nat/
For some reason the natbr1 does not appear to be getting created. These are the only things I have available. Can anyone help me please?
Code
[root@virthost ~]# ifconfig -a
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.0.199 netmask 255.255.255.0 broadcast 10.0.0.255
inet6 fe80::20c:29ff:fefc:78aa prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:fc:78:aa txqueuelen 1000 (Ethernet)
RX packets 36646 bytes 6004436 (5.7 MiB)
RX errors 0 dropped 58 overruns 0 frame 0
TX packets 3152 bytes 2733273 (2.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 29 bytes 2773 (2.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 29 bytes 2773 (2.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
viifbr0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.0.199 netmask 255.255.255.0 broadcast 10.0.0.255
inet6 fe80::4044:7cff:fe7b:54eb prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:fc:78:aa txqueuelen 1000 (Ethernet)
RX packets 13409 bytes 2279454 (2.1 MiB)
RX errors 0 dropped 2 overruns 0 frame 0
TX packets 1884 bytes 2659378 (2.5 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
