Softaculous

Topic : Ubuntu 16.04 viifbr0 does not start

Posted By: datafabrik on December 4, 2018, 5:30 pm

We just plainly installed a new node with Ubuntu 16.04 and Virtualizor. Unforunately viifbr0 can't start:
Interface is eno1 not eth0, we adjusted that in Master/Slave Settings.

/etc/init.d/virtnetwork start
Error: No ip address found.

iface br0 inet static
address 5.x.x.x
netmask 255.255.255.248
gateway 5.x.x.x
dns-nameservers 1.1.1.1 8.8.8.8
bridge_ports eno1
bridge_stp off
bridge_fd 0
bridge_maxwait 0

Kind regards
Christian

Posted By: jevingala on December 5, 2018, 2:59 pm | Post: 1

Hi,
You can verify your network settings as per this guide :
https://www.virtualizor.com/wiki/KVM_Bridge#Ubuntu_network_interface_File
And then just restart network.

-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/