Softaculous

Topic : Networking Issue on Hetzner

Page 1 of 2

Posted By: Voigon on August 6, 2018, 12:52 pm

Hello,I've recently installed Virtualizor and I am currently trying to set it up. I've purchased 6 IPs from Hetzner on subnet and I've configured them as NAT, like in the wiki. I can't ping the IP of the VPS or SSH into it. The IPs are not configured on the host, when I did it they were routing to the host and not to the VPS.

I am using the name servers suggested in the config. Netmask and gateway are from Hetzner.

Posted By: jevingala on August 7, 2018, 6:23 am | Post: 1

Hi,
May I know what are the subnet details and what settings have added for ip pool ?

-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/

Posted By: Voigon on August 7, 2018, 8:18 am | Post: 2

Quote From : jevingala August 7, 2018, 6:23 am

Hi,
May I know what are the subnet details and what settings have added for ip pool ?

Posted By: jevingala on August 7, 2018, 9:41 am | Post: 3

Hi,
We have not received any image which you might have tried to send in this post.

-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/

Posted By: Voigon on August 7, 2018, 9:57 am | Post: 4

Quote From : jevingala August 7, 2018, 9:41 am

Hi,
We have not received any image which you might have tried to send in this post.

https://imgur.com/a/XDjZmzb

Posted By: jevingala on August 7, 2018, 9:57 am | Post: 5

Hi,
May I know what is the subnet details provided by Hetzner ?

-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/

Posted By: Voigon on August 7, 2018, 10:00 am | Post: 6

Quote From : jevingala August 7, 2018, 9:57 am

Hi,
May I know what is the subnet details provided by Hetzner ?

https://imgur.com/a/4jnq1bC

Posted By: jevingala on August 7, 2018, 10:03 am | Post: 7

Hi,
Gateway for the ip pool will be first Ip of the range assigned to you.
It is also written in our wiki :

https://virtualizor.com/wiki/NAT

Edited by jevingala : August 7, 2018, 10:03 am

-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/

Posted By: Voigon on August 7, 2018, 1:16 pm | Post: 8

Quote From : jevingala August 7, 2018, 10:03 am

Hi,
Gateway for the ip pool will be first Ip of the range assigned to you.
It is also written in our wiki :

https://virtualizor.com/wiki/NAT

First IP should also be on the range or only on the gateway?

Posted By: jevingala on August 7, 2018, 1:21 pm | Post: 9

Hi,
It just needs to be set as gateway.Not usable in vps.

-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/

Posted By: Voigon on August 7, 2018, 1:47 pm | Post: 10

Quote From : jevingala August 7, 2018, 1:21 pm

Hi,
It just needs to be set as gateway.Not usable in vps.

Thank you. May I ask how to configure auto installation of Linux isos?

Posted By: Voigon on August 10, 2018, 12:35 pm | Post: 11

Quote From : jevingala August 7, 2018, 1:21 pm

Hi,
It just needs to be set as gateway.Not usable in vps.

Thank you. The IPv4 is working. However, I was not able to setup the IPv6 and couldn't find a guide for Hetzner on your wiki, are there any special instructions for Hetzner? Which gateway should I use? the one from Hetzner's robot or from "ip addr" command in the SSH?

Posted By: jevingala on August 10, 2018, 12:50 pm | Post: 12

Hi,
You will first need to configure one ipv6 on your server using any regular guide for static ipv6 networking.Once its added , add the ip pool on panel with the ipv6 (which you configured on your server) as the gateway.

-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/

Posted By: Voigon on August 10, 2018, 5:43 pm | Post: 13

Quote From : jevingala August 10, 2018, 12:50 pm

Should it be routed or nat or something?

Posted By: jevingala on August 11, 2018, 6:34 am | Post: 14

Hi,

You can set that ip pool to routed.Routed option just writes a separate route file in the vps.

Edited by jevingala : August 11, 2018, 6:36 am

-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/