Quote From : TopKiller August 27, 2019, 5:06 pm Hi,
Today i oredered a dedicated server from hetzner that has 2 nvme disks, 500gb each in software raid1 and i'm strugling creating a lvm storage.
Here's an output of some commands:
[root@CentOS-76-64-minimal etc]# pvs
[root@CentOS-76-64-minimal etc]# vgs
[root@CentOS-76-64-minimal etc]# lvs
[root@CentOS-76-64-minimal etc]# fdisk -l
Disk /dev/nvme0n1: 512.1 GB, 512110190592 bytes, 1000215216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xc111420e
Device Boot Start End Blocks Id System
/dev/nvme0n1p1 2048 67110911 33554432 fd Linux raid autodetect
/dev/nvme0n1p2 67110912 68159487 524288 fd Linux raid autodetect
/dev/nvme0n1p3 68159488 1000213167 466026840 fd Linux raid autodetect
Disk /dev/nvme1n1: 512.1 GB, 512110190592 bytes, 1000215216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x6e596057
Device Boot Start End Blocks Id System
/dev/nvme1n1p1 2048 67110911 33554432 fd Linux raid autodetect
/dev/nvme1n1p2 67110912 68159487 524288 fd Linux raid autodetect
/dev/nvme1n1p3 68159488 1000213167 466026840 fd Linux raid autodetect
Disk /dev/md1: 536 MB, 536281088 bytes, 1047424 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/md2: 477.1 GB, 477077241856 bytes, 931791488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/md0: 34.3 GB, 34326183936 bytes, 67043328 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Can someone help me out?
Tanks,
Tomas
Fromhere you would need to create a volume group:
vgcreate volumegroupname /dev/md2
If you are looking to use LVM storage for VPS, that is all you would need to do. In the storage section of Virtualizor, you would select LVM storage, and point it to /dev/volumegroupname
|