Softaculous

Topic : Root Password Error

Posted By: saeed_g21 on March 20, 2019, 3:46 pm

Hi Guys,

i can installed virtualizor kvm kernel and run success

but i can't create new vps

i got this error "There was an error in setting the Root Password of the new VPS"

and vps is create but not runing and send signal switch on this error give me "The VPS failed to start
error: Failed to create domain from /etc/libvirt/qemu/v1001.xml
error: Requested operation is not valid: network 'natbr1' is not active"

please help me for fix error

thank you very much

Posted By: jevingala on March 23, 2019, 7:12 am | Post: 1

Hi,

It seems NAT bridge is not started.
May I know what is the subnet are you adding on panel ?
What gateway have you assigned to the ip pool on panel ?

-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/

Posted By: saeed_g21 on March 24, 2019, 8:26 pm | Post: 2

Thank you for the answer you gave me

I want to start on the local network, can you explain on 192.168.1.0/24 suffering how to set it up?

Posted By: jevingala on March 25, 2019, 6:31 am | Post: 3

Hi,

Do you want to have internet using private ips ?
Then you can follow this guide :

https://www.virtualizor.com/docs/admin/manage-vps-domain-forwarding/

-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/

Posted By: saeed_g21 on March 25, 2019, 5:38 pm | Post: 4

i did so

eth0:

DEVICE=eth0
HWADDR=1C:6F:65:CA:7F:60
IPV6INIT=no
ONBOOT=yes
BRIDGE=viifbr0
NAME=eth0

viifbr0:
DEVICE=viifbr0
TYPE=Bridge
BOOTPROTO=static
IPADDR=192.168.1.200
NETMASK=255.255.255.0
ONBOOT=yes
IPV6INIT=no
NAME=viifbr0

ip pool :

gateway = 192.168.1.201
netmask = 255.255.255.0
nameserver 1,2 = 8.8.8.8 , 8.8.4.4
first ip = 192.168.1.202
last ip = 192.168.1.210
Is Internal ip range? = checked
Internal IP Bridge : viifbr0

i set ip internal & public ip to VPS = 192.168.1.203

truly my internet ip is dynamic

ip 192.168.1.0/24 is my network ip range

i want use kvm in the private network

so this error fixed "There was an error in setting the Root Password of the new VPS" but i get a new error "There was an error while starting the new VPS
setlocale: No such file or directory error: Failed to create domain from /etc/libvirt/qemu/v1004.xml error: internal error process exited while connecting to monitor: char device redirected to /dev/pts/1 2019-03-25T17:00:53.333251Z qemu-kvm: Failed to start VNC server on `PUPLICIP:1,password': socket bind failed: Cannot assign requested address 2019-03-25 17:00:53.399+0000: shutting down"

Posted By: saeed_g21 on March 25, 2019, 6:20 pm | Post: 5

By turning off option VNC, the VPS successfully turned on

I still can not test connect SSH

Posted By: jevingala on March 27, 2019, 7:07 am | Post: 6

Hi,

You will need to set the vnc ip in slave settings same as the server ip listed in license info page.
This will help in starting vps with vnc enabled.

For ssh issue, are you able to ssh the vps from server ?
If not then please provide access details to your server or remote access to your PC in ticket to check the issue.

-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/

Posted By: saeed_g21 on March 30, 2019, 7:41 pm | Post: 7

Hi,

I was able to successfully implement kvm

I had access to the internet in the virtual machine and I was able to access the virtual machine with ssh

Thank you for your guidance