Issues by installing and set up Virtualizor

Issues by installing and set up Virtualizor https://www.softaculous.com/board/index.php?tid=11880 <![CDATA[Issues by installing and set up Virtualizor]]> https://www.softaculous.com/board/index.php?tid=11880&tpg=2#p39237 No, it should be 'y', as you are not going to use that partition for creating filesystem but creating LVs and this LVs will have partitions that will have filesystems.

Please consult any LVM guide to know more.
]]> Mon, 28 Aug 2017 09:56:21 GMT https://www.softaculous.com/board/index.php?tid=11880&tpg=2#p39237 <![CDATA[Issues by installing and set up Virtualizor]]> https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p39154

Code
pvcreate /dev/md3 WARNING: ext4 signature detected on /dev/md3 at offset 1080. Wipe it? [y/n]: y

Shouldn't it be 'n' instead of 'y' (yes)?
]]> Fri, 18 Aug 2017 06:38:35 GMT https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p39154 <![CDATA[Issues by installing and set up Virtualizor]]> https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p39153

Quote From : jevingala August 18, 2017, 6:10 am

Hi,

We assume that you have basic understanding about Linux .

Assuming is good, but as you can see, it's not working in such situations. All would be sorted quickly, if you provide a detailed step by step instructions with command examples like the biggest server provider does. If they would assume, that everybody is a Linux expert, then they will probably fail on sales very soon.
]]> Fri, 18 Aug 2017 06:24:01 GMT https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p39153 <![CDATA[Issues by installing and set up Virtualizor]]> https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p39152
We assume that you have basic understanding about Linux .
You can enable rescue mode and comment the required entry and then restart and check.

Sorry for the inconvenience caused.
]]> Fri, 18 Aug 2017 06:10:55 GMT https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p39152 <![CDATA[Issues by installing and set up Virtualizor]]> https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p39151

Quote From : jevingala August 18, 2017, 5:48 am

Hi,

Was the mount entry for home commented in fstab file ?

No, it was nont, because as you can see, your support didn't provide this information to us.
]]> Fri, 18 Aug 2017 06:08:19 GMT https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p39151 <![CDATA[Issues by installing and set up Virtualizor]]> https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p39150
Was the mount entry for home commented in fstab file ?
]]> Fri, 18 Aug 2017 05:48:19 GMT https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p39150 <![CDATA[Issues by installing and set up Virtualizor]]> https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p39149

Code
 [root@vs ~]# umount /home [root@vs ~]# pvcreate /dev/md3 WARNING: ext4 signature detected on /dev/md3 at offset 1080. Wipe it? [y/n]: y Wiping ext4 signature on /dev/md3. Physical volume "/dev/md3" successfully created. [root@vs ~]# vgcreate vg /dev/md3 Volume group "vg" successfully created [root@vs ~]# reboot

the server is being INACCESSIBLE - no ssh access, no Virtualizor access.

Code
 --- 158.69.252.161 ping statistics --- 10 packets transmitted, 0 packets received, +6 errors, 100% packet loss

What now?]]> Fri, 18 Aug 2017 04:42:39 GMT https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p39149 <![CDATA[Issues by installing and set up Virtualizor]]> https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p39147 http://www.virtualizor.com/wiki/Install_KVM but the Virtualizor shows 0 GB space. This is the second time I tried to install the KVM and got same issue. Installing OpenVZ with the installation instruction went without any issues. But by KVM I'm still missing the storage. The support fixed it by the first installation and provided to me this information:

Quote

Could you please reinstall your server as per given

Root '/' ---->80-100GB
Swap ---->4Gb+
All remaining space(mounted on) /home

I did, but it didn't work. Then they fixed it and told to me:

Quote

Sir, You partition was mounted on /home partition so we have just unmonuted /home partition and then created vg and added on your panel.

umount /home
pvcreate /dev/md3
vgcreate vg /dev/md3

What is the problem? And where are these things mentionted in the installation tutorial on their site?

Regards

]]> Thu, 17 Aug 2017 22:09:41 GMT https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p39147 <![CDATA[Issues by installing and set up Virtualizor]]> https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p37530

Quote From : jevingala July 26, 2017, 7:11 am

Hi,

Setting cpu units as 1000 , cores as 2 and % to 50 should be fine for average usage in vps with original/stock kernel on your server.

For each new created VPS server?

]]> Wed, 26 Jul 2017 08:10:55 GMT https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p37530 <![CDATA[Issues by installing and set up Virtualizor]]> https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p37528
Setting cpu units as 1000 , cores as 2 and % to 50 should be fine for average usage in vps with original/stock kernel on your server.
]]> Wed, 26 Jul 2017 07:11:08 GMT https://www.softaculous.com/board/index.php?tid=11880&tpg=1#p37528