Softaculous

Topic : error:The viifbr0 is not started. Please run service virtnetwork start, Hetzner Dedicate

Posted By: diju on September 14, 2018, 4:12 pm

Hello, tell me this information in the virtualizor panel.

The viifbr0 is not started. Please run service virtnetwork start

Error...:(

No file appears / ifcfg-eth0

Code

[root@176 sysconfig]# cd /etc/sysconfig/network-scripts/

[root@176 network-scripts]# ls

ifcfg-enp4s0  ifdown-ppp       ifup-ib      ifup-Team

ifcfg-lo      ifdown-routes    ifup-ippp    ifup-TeamPort

ifdown        ifdown-sit       ifup-ipv6    ifup-tunnel

ifdown-bnep   ifdown-Team      ifup-isdn    ifup-wireless

ifdown-eth    ifdown-TeamPort  ifup-plip    init.ipv6-global

ifdown-ib     ifdown-tunnel    ifup-plusb   network-functions

ifdown-ippp   ifup             ifup-post    network-functions-ipv6

ifdown-ipv6   ifup-aliases     ifup-ppp     service

ifdown-isdn   ifup-bnep        ifup-routes

ifdown-post   ifup-eth

Please Helpme...

Posted By: jevingala on September 18, 2018, 7:30 am | Post: 1

Hi,
You need to enter enp4s0 as network interface name in configuration->Slave settings .Make sure ifcfg-enp4s0 has ip address, netmask and gateway entries .Then try to start virtnetwork service.

-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/

Posted By: diju on September 19, 2018, 8:13 pm | Post: 2

this is what that file indicates, please help me as it should be.

Please

Quote

NAME="enp4s0"
DEVICE="enp4s0"
ONBOOT=yes
NETBOOT=yes
UUID="8d5aca27-75aa-4a99-a618-7bedcecb6f91"
IPV6INIT=yes
BOOTPROTO=dhcp
TYPE=Ethernet
DNS1="213.133.100.100"
~
~
~
~
~
~
~
~
~
~
~
~
~
"/etc/sysconfig/network-scripts/ifcfg-enp4s0" 10L, 191C

Posted By: jevingala on September 20, 2018, 6:41 am | Post: 3

Hi,
You will need to add ipaddress , netmask and gateway entries and set BOOTPROTO=static .

-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/

Posted By: AnyTimeTabletHire on June 17, 2019, 1:55 pm | Post: 4

Interesting great sharing ;-D