Softaculous https://www.softaculous.com/board/index.php? <![CDATA[Can i export "Home Header" from one]]> https://www.softaculous.com/board/index.php?tid=18106&tpg=1#p54034 I screwed up my "Home" template for the subpages.  How can I export a good template from one of my other sites and then import to my corrupted site and overwrite it. Re-entering the changes is better than what I have now.
]]>
Fri, 03 Dec 2021 15:56:11 GMT https://www.softaculous.com/board/index.php?tid=18106&tpg=1#p54034
<![CDATA[Stuck on scheduled rather than publishing]]> https://www.softaculous.com/board/index.php?tid=18105&tpg=1#p54033
]]>
Thu, 02 Dec 2021 18:43:21 GMT https://www.softaculous.com/board/index.php?tid=18105&tpg=1#p54033
<![CDATA[Webuzo 3.1.3 Launched]]> https://www.softaculous.com/board/index.php?tid=18104&tpg=1#p54032 https://webuzo.com/blog/webuzo-3-1-3-launched/]]> Thu, 02 Dec 2021 15:00:24 GMT https://www.softaculous.com/board/index.php?tid=18104&tpg=1#p54032 <![CDATA[Can't access VPS after fresh built from Panel]]> https://www.softaculous.com/board/index.php?tid=18103&tpg=1#p54031
I'm very new to this. I want to buy Virtualizor and wish to use your services. But currently I need a bit technical support in trial so if everything goes well, I would use Virtualizor to create VPSes and host my websites..

I have followed your documentation to install Virtualizor on my Server, Access through Web Portal and created OS Templates, Added Storage, Specified network interface. Now I created 2 VPSes. The both 2 VPSes were built and started successfully with CentOS 7 and also I gave it a command of cPanel to install too.

But now, the issue is I cannot access any of the VPS through SSH or even through cPanel URL.
What is the issue? My License is activated on same email given above. Can you tell me what's wrong with my Virtualizor Panel?

As everything seems to be perfectly working. I created VPSes without any errors. I should access them through SSH now but when I enter VPS IP and Default Port 22 to access SSH via Putty. It says connection timed out. ]]>
Thu, 02 Dec 2021 12:51:11 GMT https://www.softaculous.com/board/index.php?tid=18103&tpg=1#p54031
<![CDATA[NVME best virtual machine performance.]]> https://www.softaculous.com/board/index.php?tid=18101&tpg=1#p54030 ]]> Wed, 01 Dec 2021 00:39:30 GMT https://www.softaculous.com/board/index.php?tid=18101&tpg=1#p54030 <![CDATA[Loginizer 1.6.9 Launched]]> https://www.softaculous.com/board/index.php?tid=18102&tpg=1#p54029
The Loginizer Team has launched version 1.6.9 with the following changes :

1) [Bug Fix] [Pro] Fix to not show Loginizer 2FA Security Settings in Edit Account page in WooCommerce Customer area. It will be shown in Security tab (registered by Loginizer) instead.

More features will be coming in the next releases.

You can download the free version from WordPress Plugin directory :
https://wordpress.org/plugins/loginizer/

Regards,
The Loginizer Team]]>
Tue, 30 Nov 2021 13:31:36 GMT https://www.softaculous.com/board/index.php?tid=18102&tpg=1#p54029
<![CDATA[NVME best virtual machine performance.]]> https://www.softaculous.com/board/index.php?tid=18101&tpg=1#p54028
I'm using the Intel (R) Xeon (R) CPU E3-1270 v6 @ 3.80GHz node
NVME SAMSUNG 980 EVO PRO


driver=virtio io = native cache=none

Code
But the speed in gives out only on vps
[root @ alex ~] # fio --randrepeat = 1 --ioengine = libaio --direct = 1 --gtod_reduce = 1 --name = test --filename = testio --bs = 4k --iodepth = 64 - size = 4G --readwrite = randread
test: (g = 0): rw = randread, bs = (R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine = libaio, iodepth = 64
fio-3.7
Starting 1 process
Jobs: 1 (f = 1): [r (1)] [100.0%] [r = 560MiB / s, w = 0KiB / s] [r = 143k, w = 0 IOPS] [eta 00m: 00s]
test: (groupid = 0, jobs = 1): err = 0: pid = 1012: Tue Nov 30 05:22:05 2021
  read: IOPS = 142k, BW = 556MiB / s (583MB / s) (4096MiB / 7363msec)
  bw (KiB / s): min = 528728, max = 576520, per = 99.71%, avg = 567975.50, stdev = 12652.63, samples = 14
  iops: min = 132182, max = 144130, avg = 141993.86, stdev = 3163.15, samples = 14
  cpu: usr = 20.69%, sys = 54.28%, ctx = 20394, majf = 0, minf = 95
  IO depths: 1 = 0.1%, 2 = 0.1%, 4 = 0.1%, 8 = 0.1%, 16 = 0.1%, 32 = 0.1%,> = 64 = 100.0%
    submit: 0 = 0.0%, 4 = 100.0%, 8 = 0.0%, 16 = 0.0%, 32 = 0.0%, 64 = 0.0%,> = 64 = 0.0%
    complete: 0 = 0.0%, 4 = 100.0%, 8 = 0.0%, 16 = 0.0%, 32 = 0.0%, 64 = 0.1%,> = 64 = 0.0%
    issued rwts: total = 1,048576,0,0,0 short = 0,0,0,0 dropped = 0,0,0,0
    latency: target = 0, window = 0, percentile = 100.00%, depth = 64

Run status group 0 (all jobs):
  READ: bw = 556MiB / s (583MB / s), 556MiB / s-556MiB / s (583MB / s-583MB / s), io = 4096MiB (4295MB), run = 7363-7363msec

Disk stats (read / write):
  vda: ios = 994246/39, merge = 0/26, ticks = 345099/3, in_queue = 345102, util = 98.66%


And the speed on the node

Code
[root @ kvm-nd500 kvm] # fio --randrepeat = 1 --ioengine = libaio --direct = 1 --gtod_reduce = 1 --name = test --filename = testio --bs = 4k --iodepth = 64 --size = 4G --readwrite = randread
test: (g = 0): rw = randread, bs = (R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine = libaio, iodepth = 64
fio-3.7
Starting 1 process
test: Laying out IO file (1 file / 4096MiB)
Jobs: 1 (f = 1): [r (1)] [100.0%] [r = 1325MiB / s, w = 0KiB / s] [r = 339k, w = 0 IOPS] [eta 00m: 00s]
test: (groupid = 0, jobs = 1): err = 0: pid = 28119: Tue Nov 30 15:23:25 2021
  read: IOPS = 336k, BW = 1311MiB / s (1374MB / s) (4096MiB / 3125msec)
  bw (MiB / s): min = 1253, max = 1327, per = 100.00%, avg = 1312.22, stdev = 29.06, samples = 6
  iops: min = 320806, max = 339920, avg = 335927.33, stdev = 7438.83, samples = 6
  cpu: usr = 38.32%, sys = 61.59%, ctx = 373, majf = 0, minf = 93
  IO depths: 1 = 0.1%, 2 = 0.1%, 4 = 0.1%, 8 = 0.1%, 16 = 0.1%, 32 = 0.1%,> = 64 = 100.0%
    submit: 0 = 0.0%, 4 = 100.0%, 8 = 0.0%, 16 = 0.0%, 32 = 0.0%, 64 = 0.0%,> = 64 = 0.0%
    complete: 0 = 0.0%, 4 = 100.0%, 8 = 0.0%, 16 = 0.0%, 32 = 0.0%, 64 = 0.1%,> = 64 = 0.0%
    issued rwts: total = 1,048576,0,0,0 short = 0,0,0,0 dropped = 0,0,0,0
    latency: target = 0, window = 0, percentile = 100.00%, depth = 64

Run status group 0 (all jobs):
  READ: bw = 1311MiB / s (1374MB / s), 1311MiB / s-1311MiB / s (1374MB / s-1374MB / s), io = 4096MiB (4295MB), run = 3125-3125msec

Disk stats (read / write):
  nvme0n1: ios = 1034074/0, merge = 0/0, ticks = 58610/0, in_queue = 58610, util = 96.92%




How to increase the speed of NVME in virtual machines?]]>
Tue, 30 Nov 2021 10:26:43 GMT https://www.softaculous.com/board/index.php?tid=18101&tpg=1#p54028
<![CDATA[Anyone using Hetzner with multiple IPs?]]> https://www.softaculous.com/board/index.php?tid=18099&tpg=1#p54027

No, they do not provide such an option to use same MAC for both IPs.]]>
Mon, 29 Nov 2021 14:11:16 GMT https://www.softaculous.com/board/index.php?tid=18099&tpg=1#p54027
<![CDATA[Can't connect to local MySQL server through socket]]> https://www.softaculous.com/board/index.php?tid=18100&tpg=1#p54026

You can also try using this guide :


https://www.virtualizor.com/docs/faq/panel-is-offline/]]>
Mon, 29 Nov 2021 13:11:54 GMT https://www.softaculous.com/board/index.php?tid=18100&tpg=1#p54026
<![CDATA[Can't connect to local MySQL server through socket]]> https://www.softaculous.com/board/index.php?tid=18100&tpg=1#p54024
Code
systemctl status mysql


if mysql is running, check your my.cnf config file if you have the following line in the [mysqld] section:

socket=/var/lib/mysql/mysql.sock

If not, add this line and restart mysql]]>
Mon, 29 Nov 2021 07:42:14 GMT https://www.softaculous.com/board/index.php?tid=18100&tpg=1#p54024