Welcome Guest. Please Login or Register  


You are here: Index > Virtualizor - Virtual Server Control Panel > General Support > Topic : OpenVZ 7 network problem



Threaded Mode | Print  

 OpenVZ 7 network problem (2 Replies, Read 501 times)
ja24
Group: Member
Post Group: Newbie
Posts: 4
Status:
Hi, I try to install OpenVZ 7 for virtualizor on ovh (sys) server via rescue and qemu and the server start to boot OpenVZ 7 but the server is not reachable because the network seems to be not configure correctly for some reason , I try to edit the network configuration via rescue mode but it not work again here is my conf

ifcfg-br0

DEVICE="br0"
TYPE="Bridge"
BOOTPROTO="static"
IPADDR=***.70.80.43
NETMASK=255.255.255.0
ONBOOT="yes"
GATEWAY=***.70.80.254
DELAY="0"
ARPCHECK="no"

ifcfg-ens3

NAME="ens3"
DEVICE="ens3"
ONBOOT=yes
TYPE=Ethernet
BRIDGE="br0"

I hope someone can help me with this problem
IP: --   

OpenVZ 7 network problem
jevingala
Group: Virtualizor Team
Post Group: Elite Member
Posts: 333
Status:
Hi,
It seems to be fine.Is bridge-utils installed on the server ?Does it boots with network without setting up a bridge ?


-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/
IP: --   

OpenVZ 7 network problem
ja24
Group: Member
Post Group: Newbie
Posts: 4
Status:
I found what was the problem I have to rename the ens3 to enp1s0.
IP: --   

« Previous    Next »

Threaded Mode | Print  



Jump To :


Users viewing this topic
1 guests, 0 users.


All times are GMT. The time now is December 16, 2018, 6:45 pm.

  Powered By AEF 1.0.8 © 2007-2008 Electron Inc.Queries: 11  |  Page Created In:1.056