Softaculous

Topic : Additional IP to the Hetzner dedicated server

Posted By: bsdev on October 11, 2019, 12:36 pm

Hello
I have been working on adding the Additional IP as a pool on Virtulizor and make the VMs reachable but without success.
I have started the virtnetwork and it created the viifbr0 with the Dedicated Server IP.
I added the pool as Routed - but without success (but machines still do not have access to internet)
I tried adding it as NAT but it gives me an error (Requested operation is not valid.network "natbr8" is not active) when i assing the ip to a VM and trying to start it.

This is what i have from Hetzner:

Below you will find the IP subnet added to your server and statically routed on the IP 192.168.50.205

Gateway: 192.168.50.193

Netmask: 255.255.255.192

Broadcast: 192.168.50.255

Additional IPs:

192.168.185.0 / 27 (Usable 192.168.185.1-31)

-----------------------
Web : www.bsdev.al
Email : info@bsdev.al

Posted By: enginama on October 13, 2019, 1:04 pm | Post: 1

read this post, need to use the main IP as the gateway not the gateway that hetzner tell you.
https://www.softaculous.com/board/index.php?tid=15708

Posted By: bsdev on October 14, 2019, 6:51 am | Post: 2

Thanks this worked for me.

This was the reply given from northnetworking which did work for me.

Quote

The gateway will be the one that is listed as gateway in the email
The first and the last IP in the subnet is not usable.

if your range is 99.99.99.1 - 99.99.99.10

in the First IP you enter 99.99.99.2 and in the Last IP 99.99.99.9

Netmask is 255.255.255.0

And tick the NAT box.

NOTE :If after adding the pool creating the VPS gives an error that natbr is not working, just restart the server

-----------------------
Web : www.bsdev.al
Email : info@bsdev.al