Softaculous


Topic : OpenVZ 7 network problem


Posted By: ja24 on August 22, 2018, 7:20 pm
Hi, I try to install OpenVZ 7 for virtualizor on ovh (sys) server via rescue and qemu and the server start to boot OpenVZ 7 but the server is not reachable because the network seems to be not configure correctly for some reason , I try to edit the network configuration via rescue mode but it not work again here is my conf

ifcfg-br0

DEVICE="br0"
TYPE="Bridge"
BOOTPROTO="static"
IPADDR=***.70.80.43
NETMASK=255.255.255.0
ONBOOT="yes"
GATEWAY=***.70.80.254
DELAY="0"
ARPCHECK="no"

ifcfg-ens3

NAME="ens3"
DEVICE="ens3"
ONBOOT=yes
TYPE=Ethernet
BRIDGE="br0"

I hope someone can help me with this problem

Posted By: jevingala on August 23, 2018, 10:52 am | Post: 1
Hi,
It seems to be fine.Is bridge-utils installed on the server ?Does it boots with network without setting up a bridge ?


-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/

Posted By: ja24 on August 23, 2018, 1:37 pm | Post: 2
I found what was the problem I have to rename the ens3 to enp1s0.

Powered By AEF 1.0.8 © 2007-2008 Electron Inc.