Welcome Guest. Please Login or Register  


You are here: Index > Virtualizor - Virtual Server Control Panel > General Support > Topic : nic speed 1000mb/s



Threaded Mode | Print  

 nic speed 1000mb/s (1 Replies, Read 3732 times)
ritche
Group: Member
Post Group: Newbie
Posts: 1
Status:
How do I change to use the same network speed as the host..
Currently its set to 100mb/s in the vps.

root@irc:~# ethtool eth0
Settings for eth0:
        Supported ports: [ TP MII ]
        Supported link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: Yes
        Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                            100baseT/Half 100baseT/Full
        Link partner advertised pause frame use: Symmetric
        Link partner advertised auto-negotiation: No
        Speed: 100Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 32
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: pumbg
        Wake-on: d
        Current message level: 0x00000007 (7)
                              drv probe link
        Link detected: yes
root@irc:~# ethtool eth0
Settings for eth0:
        Supported ports: [ TP MII ]
        Supported link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: Yes
        Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                            100baseT/Half 100baseT/Full
        Link partner advertised pause frame use: Symmetric
        Link partner advertised auto-negotiation: No
        Speed: 100Mb/s
IP: --   

nic speed 1000mb/s
jevingala
Group: Virtualizor Team
Post Group: Super Member
Posts: 739
Status:
Hi,
You can set the NIC type to Intel e1000 and then stop and start the vps from panel and check.


-----------------------
Regards,
Virtualizor Team.
http://virtualizor.com/
IP: --   

« Previous    Next »

Threaded Mode | Print  



Jump To :


Users viewing this topic
1 guests, 0 users.


All times are GMT. The time now is March 29, 2024, 8:49 am.

  Powered By AEF 1.0.8 © 2007-2008 Electron Inc.Queries: 11  |  Page Created In:0.019