Quote From : wolke October 4, 2018, 2:38 pm You could mark IP from the pool as locked, so it will not be used for newly created vm.
wolke, thanks for the update, however i would not create this thread if it was so obvious as you suggest. can you elaborate on exactly how to do that? i only see the following options on IP pool edit page:
Quote Edit IP Pool
Name
The name of this IP Pool
xx.xx.xx.98-126
Gateway
xx.xx.xx.97
Netmask
255.255.255.224
Nameserver 1
If not aware then use 4.2.2.1
xx.xx.xx.2
[Google] [Open DNS] [Comodo][Smart Viper]
Nameserver 2
If not aware then use 4.2.2.2
xx.xx.xx.2
Server
The server this IP Pool belongs to
All Servers[Group] Default - localhost - example.hostname
Use Routed network
If checked, routed networking will be used
MTU
Specify the Maximum Transmission Unit in Bytes. If empty the default value will be used.
In other words, there is no any option to mark an IP as taken.
Edited by Moderator : October 5, 2018, 7:01 am |