Virtualizor Network not working.
When I do
Code service virtnetwork start
I get:
Code SIOCADDRT: Network is unreachable
Bringing up viifbr0 - OK
Waiting for 30 seconds...1...2...3...4...5...6...7...8...9...10...11...12...13...14...15...16...17...18...19...20...21...22...23...24...25...26...27...28...29...30
Unable to ping ... Restarting normal network
Stopping viifbr0 ... Restarting normal network
Restarting network (via systemctl): [ OK ]
Ping 4.2.2.1:
Code [root@CentOS-73-64-minimal ~]# ping -c 5 4.2.2.1
PING 4.2.2.1 (4.2.2.1) 56(84) bytes of data.
64 bytes from 4.2.2.1: icmp_seq=1 ttl=58 time=6.28 ms
64 bytes from 4.2.2.1: icmp_seq=2 ttl=58 time=6.30 ms
64 bytes from 4.2.2.1: icmp_seq=3 ttl=58 time=6.23 ms
64 bytes from 4.2.2.1: icmp_seq=4 ttl=58 time=6.22 ms
64 bytes from 4.2.2.1: icmp_seq=5 ttl=58 time=6.19 ms
--- 4.2.2.1 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4005ms
rtt min/avg/max/mdev = 6.193/6.249/6.302/0.040 ms
IFConfig:
Code enp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 5.9.23.8 netmask 255.255.255.255 broadcast 255.255.255.255
inet6 2a01:4f8:161:205::2 prefixlen 64 scopeid 0x0<global>
inet6 fe80::ca60:ff:fe5e:c2ed prefixlen 64 scopeid 0x20<link>
ether c8:60:00:5e:c2:ed txqueuelen 1000 (Ethernet)
RX packets 2966 bytes 281027 (274.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2579 bytes 301121 (294.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 40 bytes 6607 (6.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 40 bytes 6607 (6.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp4s0 file:
Code
### Hetzner Online GmbH installimage
DEVICE=enp4s0
ONBOOT=yes
BOOTPROTO=none
IPADDR=5.9.23.8
NETMASK=255.255.255.254
SCOPE="peer 5.9.23.1"
IPV6INIT=yes
IPV6ADDR=2a01:4f8:161:205::2/64
IPV6_DEFAULTGW=fe80::1
IPV6_DEFAULTDEV=enp4s0
GATEWAY=5.9.23.1
DNS1=8.8.8.8
Please help
|