Group: Member 
Post Group: Newbie
Posts: 4
Status: 
|
In addition to verifying the bridge name (like vmbr0) and gateway settings, make sure IP forwarding (net.ipv4.ip_forward=1) is enabled on the host node and check whether your datacenter requires a virtual MAC assigned to each routed IP.
On providers like OVH or Hetzner, even if the IP pool and bridge are configured properly inside Virtualizor, outgoing packets from the VPS will get dropped at the switch level if the virtual MAC isn't bound to the specific IP in the host panel or if the MAC address inside the VPS config doesn't match. Checking tcpdump on the host's main interface while pinging from the VPS usually shows right away if the traffic is leaving the node or getting blocked
----------------------- clicker games |